The features of the Corsair Cooling Hydro H150i PRO at a glance:
Complete water cooling system with easy installation
Pre-filled and maintenance-free
High cooling capacity
Three quiet Static Pressure 120mm fans
Corsair Link with software fan control
The features of the Corsair Cooling Hydro H150i PRO in detail
However, all the compact WaKü systems combine the basic design: they consist of two parts - the radiator and the heat sink. While the radiator on the Hydro H150i PRO is mounted on three 120 fan slots - preferably on the front or top of the case - the radiator fits on the CPU. The pump and the expansion tank are already installed in the radiator housing. Because it is a closed circuit, the system does not need maintenance.
The bottom of the heatsink absorbs the waste heat from the processor and, thanks to the copper bottom plate, efficiently transfers it to the water. This in turn is pumped by the pump in the direction of the radiator, where the cooling fluid flows through a fine lamellar structure and releases the heat to the air flowing through. The fan in turn ensures that the radiator is constantly supplied with fresh air. Compared to its predecessor, the Hydro H150i PRO has been further optimized, now looks a bit more stylish and also has sheathed hoses.
Quiet fans cool the radiator
The Hydro H150i PRO has two very powerful fans from the Corsair Air Series, more precisely: three high-performance fans from Corsair's ML series. These are optimized for high static pressure, which is important for operation with a radiator. Specially designed wings in the 120mm fans offer a better balance between static pressure and noise levels for higher performance with less noise than ordinary fans. There is even the option to increase the number of fans to a maximum of six, which then act in push-pull configuration.
The Corsair Link Series features the other i models in the Corsair Hydro Series - just plug the attached Corsair Link cable into a USB header on the motherboard and download the free Corsair Link Dashboard software. Thus, the coolant temperature can be monitored by application and the cooling capacity can be controlled. The software also allows color effects to be set, as the Corsair logo on the pump can be illuminated with RGB LEDs in all conceivable colors and, for example, depending on the coolant temperature.
For reasons of space, tower coolers can usually not be used, especially in compact housings. In the case of the Hydro H150i PRO, however, only the flat cooler needs to sit directly on the CPU. The radiator can be installed quite freely at a suitable slot, taking into account the hose length.
The mounting system of the Hydro H150i PRO is suitable for the 1150, 1151, 1155, 1156, 1366, 2011 (-3), 2066, AM2, AM3, AM4, FM1 and FM2 sockets. The tool-free magnetic mounting brackets in a modular design makes installation easy. Thermal compound is already applied to the radiator underside.
Radiator size: 360 mm (396 x 27 x 120 mm)
Fan: 3x 120 mm (max 25 dB (A), 1,600 rpm, PWM)
Intel: LGA 115X, 1366, 2011 (-3), 2066
AMD: AM2, AM3, AM4, FM1, FM2