Corsair Carbide 678C Midi-Tower - black Window [CC-9011167-WW]

This exciting combination is also successful with the Carbide 678C. The tidy interior with plenty of room for hardware has been optimized for effective airflow and pleasantly low noise levels. The Midi Tower also offers multiple radiator installation points and enough room for powerful graphics cards.

The Corsair Carbide 678C Midi-Tower at a glance:
- Elegant Silent Midi Tower in black
- Pre-installed insulation in the lid, front and right side panel
- Left side panel made of tempered glass
- Up to nine 120 / eight 140 fans, three 140-mm fans pre-installed
- I / O panel with 1x USB 3.1 type C, 2x USB 3.0, power button & HD audio
- GPUs up to 37 cm & CPU cooler up to 17 cm
- PWM fan controller preinstalled for up to six fans
- 1x 5.25-inch bay, 6x 3.5-inch bays and 3x 2.5-inch slots
- Modular interior for high flexibility

Externally, the Corsair Carbide 678C offers simple and unfussy shapes: the front is adorned with a flat, right-hinged plastic door with an aluminum look. This is decorated by a subtle manufacturer logo. On the left, a large, rear-opening tempered-glass side window allows a view of the black interior of the case and the hardware built into it.

The Corsair Carbide 678C offers flexible options for customizing the interior: its modular drive bays can be removed one at a time to save space for the installation of a water cooling system or simply to remove superfluous accessories from the case for the purest possible look , Despite the ambition to keep the noise level as low as possible, the 678C offers an open design inside the case and is ideally designed for a particularly good airflow. In addition, hardware is protected by removable dust filters in the front, bottom and top.

Cooling with air and water
Up to nine 120 or eight 140 fans have room in the Corsair Carbide 678C and up to six can be synchronized via the integrated PWM fan control. In front, three 120 mm fans or two 140 mm fans can be mounted. In the case cover fit respectively three 140 or 120-millimeter fans. Below can be installed two more fans in 120 or 140 format. There is room for another fan of the same size on the back. Three 140-millimeter fans are pre-installed at the factory: one in the front, one in the lid and one in the back wall. If you opt for the installation of an all-in-one water cooling system to cool your CPU, you can attach a radiator up to 420 mm in the lid, while the front can hold a 280 or even 360 heat exchanger. A 120 or 140 mm radiator can be accommodated at the rear.

Space for drives and expansion cards
Up to six 3.5- / 2.5-inch disks can be accommodated in the individual, modular HDD carriers. Behind the motherboard tray are three 2.5-inch drives space. In addition, the Carbide 678C has a 5.25-inch optical drive bay. Under the cover is an HDD cage that accommodates two 3.5-inch drive carriers to mount a front-mounted radiator. In addition, there is the power supply its place, which may be up to 225 mm long.

Up to 370 mm long gaming graphics cards can be installed in this Midi-Tower - of course in multi-GPU setup. There are also two slots for the vertical installation of a graphics card. The required riser cable is not included and must be purchased separately. There is also enough space for CPU fans with 170 mm. The I / O panel is located on the upper side of the discreet front bezel and is equipped with a USB 3.1 Type C port, two USB 3.0 ports and the obligatory audio ports.

Technical details:

- Dimensions: 239 x 497 x 549 mm (W x H x D)
- Material: steel (chassis), tempered glass (side part), plastic (front)
- Color: Black
- Weight: approx. 13.06 kg
- Form factor: ATX, Micro-ATX, Mini-ITX
Fan:
- 3x 120 / 2x 140 mm (front)
- 3x 120 / 3x 140 mm (cover)
- 1x 120 / 1x 140 mm (back)
- 2x 120 / 2x 140 mm (underside)
Preinstalled:
 1x 140 mm (front)
- -1x 140 mm (cover)
- 1x 140 mm (back)
- PWM fan control:
Connections:
- 6x 4-pin PWM socket (fan connections)
- 1x SATA power (power supply)
- 1x 4-pin PWM connector (signal to mainboard)
Radiator Mountings:
- 1x max. 360/280 mm (front)
- 1x 140/120 mm (back)
- 1x 420/360 mm (cover)
- Filter: front, lid, bottom (removable)
- Noise insulation: cover / right side panel
Drive Bays:
- 1x 5.25 inches (external)
 6x 3.5 / 2.5 inches (internal, single HDD carrier)
- -3x 2.5 inches (internal, behind mainboard tray)
- Power adapter: standard ATX (optional)
- Expansion Slots: 7 + 2 (Vertical)
I / O panel:
- 1x USB 3.1 Type C (USB 3.1 Gen 2)
- 2x USB 3.0 Type A
- 1x each audio in / out
- Max. Graphic card length: 370 mm
- Max. Net length: 225 mm
- Max. Height CPU cooler: 170 mm