Corsair Carbide 275R Midi Tower - White Window [CC-9011131-WW]

This exciting combination of modern elegance and classic style also succeeds in the Carbide 275R. The tidy interior with plenty of space for hardware can be admired through a side panel made of acrylic glass. The design of the rather minimalist-looking tower also offers several installation points for radiators and can accommodate up to 37 cm long graphics cards.

The Corsair Carbide 275R Midi Tower at a glance:
- Discreet midi-tower in white with side part made of acrylic glass
- Ideal for installing Corsair's all-in-one water cooling systems
- Maximum of six fan slots, two fans pre-installed
- I / O panel with 2x USB 3.0, power button & HD audio
- GPUs up to 37 cm & CPU cooler up to 17 cm
- 2x 3.5-inch / 2.5-inch bays in the HDD cage & 4x 2.5-inch slots behind the motherboard tray

Tidy internal layout for maximum gaming hardware
The Corsair Carbide 275R Midi-Tower with the side part made of acrylic glass follows a very straightforward design, which offers plenty of space in the interior. Up to 370 mm long gaming graphics cards can be installed - of course in multi-GPU setup. There are also two slots for the vertical installation of a graphics card. The required riser cable is not included and must be purchased separately. For CPU fans, there is also enough room with 170 mm.

If you opt for the installation of an all-in-one water cooling system to cool your CPU, you can attach a radiator up to 240 mm in the lid, while the front can hold a 280 or even 360 heat exchanger. A 120 mm radiator can be accommodated at the rear. Corsair offers its own range of AiO water coolers that are naturally compatible with the Carbide 275R, numerous models from Corsair's Hydro series.

Optimized airflow and discreet LED lighting
The open design of the housing interior is ideal for a particularly good airflow. Up to six fans are included in the Corsair Carbide 275R Midi-Tower. Front instead of three 120-mm fans and two 140-mm fans can be mounted. One is already preinstalled there. Above, two 120 mm fans fit in and allow unhindered transport of warm air out of the housing through a mesh grille. At the back of another 120 mm fan occupies the only space available there.

For protection of the installed hardware, there are three dust filters. Two magnetic are on the front and top, the dust filter on the bottom can be pulled out to the rear. At the bottom of the front, Corsair has added white LEDS that discreetly illuminate the floor in front of the Carbide 275R.

Two 2.5-inch or 3.5-inch disks can be installed in the HDD cage under the power supply cover. Under the cover is also the power supply its place, which may be up to 180 mm long. At the back of the mainboard tray, there are still holders for four 2.5-inch drives. The I / O panel is located on the right side of the discreet front panel and is equipped with two USB 3.0 ports and the obligatory audio connections.

Technical details:
- Dimensions: 211 x 437 x 446 mm (W x H x D)
- Material: steel, plastic, acrylic glass
- Color white
- Weight: approx. 8.56 kg
- Form factor: ATX, Micro-ATX, Mini-ITX
Fan:
- 3x 120 or 2x 140 mm (front)
- 1x 120 mm (back)
- 2x 120 mm (cover)
Preinstalled:
- 1x 120 mm (front)
- 1x 120 mm (back)
Radiator Mountings:
- 1x max. 280/360 mm (front)
- 1x 120 mm (back)
- 1x 240mm (cover)
- Filter: front, lid, bottom (removable)
Drive Bays:
- 2x 2.5 inches / 3.5 inches (internal, HDD cage)
- 4x 2.5 inches (internally, behind mainboard tray)
- Power supply: standard ATX (optional)
- Expansion Slots: 7 + 2 (Vertical)
I / O panel:
- 2x USB 3.0
- 1x each audio in / out
- Max. Graphic card length: 370 mm
- Max. Net length: 180 mm
- Max. Height CPU cooler: 170 mm