With the brand new Liquid Coolant Pro Coollaboratory now enters another field - the claim remains the same.
The features of the Liquid Coolant Pro concentrate:
- Red coloring
- UV-active under UV action
- State-of-the-art corrosion protection through complex inhibitors
- Suitable for mixed operation! (Copper, aluminum, brass, nickel, silver, gold, steel)
- Concentrate, mix in the ratio 1: 9 with distilled water.
- Storable locked for 3 years
- Long-term stability
Coollaboratory Liquid Coolant Pro in detail
After two years of intensive development and research work, Coollaboratory finally presents its Liquid Coolant Pro coolant, which, in addition to an extremely elegant color, promises optimum protection for water cooling. This is how the liquid should hold what only a few coolants create on the market: effective and long-term protection against corrosion.
The concentrate, mixed with 900 ml of distilled water, produces a radiant red and UV-active cooling liquid that ensures uncompromising long-term protection of the individual metals and alloys in the water cycle even in mixed systems. Whether copper, aluminum, brass, nickel or steel, with the Liquid Coolant Pro an extremely good protection for the components is established within a very short time.
Unlike many other colored liquids, the Liquid Coolant Pro does not contain any paint particles or suspended matter that could settle in coolers or the pump, damaging the water cooling system. It effectively prevents the formation of galvanic elements that destroy less noble metals. Thanks to the inhibitors used in the coolant, the corrosion current, which can be repeatedly measured in water cooling systems, is reduced by approx. 90% within two hours and by approx. 99% after one day. After two days, there is no measurable electrochemical corrosion, which means that the water cooling is protected in the best possible way. Model prison!
Note: When changing the coolant, you should completely drain any existing coolant from the water cooling system and then rinse with hot tap water for 5-10 minutes. Thus, residues of the previously used liquid or production residues of coolers / radiators are flushed out of the water cooling system. The use of cleaning agents is not recommended.
The Coollaboratory Liquid Coolant Pro must under no circumstances be mixed with other coolants and paints, as this may seriously impair or even completely eliminate the protective effect.
- Content: 100ml
- Mixing ratio: 1: 9 (100ml concentrate plus 900ml distilled water)
- No dangerous good according to GGVS / GGVE