Cooler Master Cosmos C700P Big-Tower - silver [MCC-C700P-MG5N-S00]

The features of the Cooler Master Cosmos C700P at a glance

    Unique design
    Curved side part made of tempered glass
    Brushed aluminum surfaces
    Fully modular
    Modern interior concept with screens
    Intelligent cable management
    Space for up to 15 drives
    Integrated fan and RGB LED controller
    3 RGB fans pre-installed
    Removable HDD cages
    Lots of space for water cooling
    Excessive graphics cards up to 49 cm possible
    Three dust filters up, down and at the front

The Cosmos C700P with futuristic design and many features

Outwardly, the C700P deviates significantly from its ancestors: there are more corners and edges. But above all impresses the unique, attached to hinges, curved glass side part, which immediately draws the attention to itself and the interior of the case. Futuristic in this combination, the four Cosmos-typical strips, which serve as a design element and at the bottom at the same time as a stand and at the top as carry handles for transport. They are still - extremely noble! - made of brushed aluminum. But not only that: once switched on, there RGB LEDs light up and immerse the extraordinary case in an atmospheric light.

But not only externally, the Cosmos C700P is impressive. The engineers at Cooler Master have designed the housing as modular as possible. All it takes is a simple screwdriver to disassemble it into its components, rivets can not be found. For example, it's easy to remove the eye-catching screens in front of the optional power supply and front drive shaft. Behind it lies the controller for the RGB LED lighting. In addition, another 5.25-inch drive can be placed there, which disappears on the outside behind the removable plastic front with its sound insulation panel.

Lots of space for fans and radiators

Behind the front mesh element, the two pre-installed 140-mm fan with dust filter are installed. There, a radiator with a size of up to 420 mm can be accommodated, provided the ODD cage is removed. Then a radiator with a size of up to 360 mm can also be accommodated on the top side. At the front is the I / O panel with its four USB 3.0 Type A sockets. In addition, there is also a USB 3.1 Type C plug, audio in and out and the controller for RGB lighting. Incidentally, three 3-pin fan connections and one RGB LED connection are still available on the controller board.

By default, a 5.25-inch and two 2.5-inch or 3.5-inch drives fit into the Cooler Master Cosmos C700P. With the ODD cage behind the front, the number increases to a total of two 5.25-inch and up to 9 2.5-inch or 3.5-inch drives. If the 3.5-inch HDD cage removed, instead of 32 inches remain a whopping 49 centimeters of space for the graphics card. In total, there are eight expansion slots. Two additional 2.5-inch bays are located on the back of the mainboard tray. The tray can also be easily removed and rotated 180 degrees. Of course, the mainboard tray can also be mounted so that the Maiboard is oriented to the right, then it can only rotate 90 degrees to achieve an even better chimney effect in air cooling.

Sufficient space for large CPU cooler

On the back of the third pre-installed 140-mm RGB fan is installed. Optionally, a 120 mm or 140 mm radiator, such as an AiO water cooling system for the CPU, will also fit there. If you prefer to use conventional CPU cooler, you may obstruct a height of up to 19.8 centimeters. Space is also for oversized power supplies, which may then disappear behind the screen again. At the bottom is again a dust filter over a mesh element. By the way, if you do not find the right side part of steel chic, you can buy a second one made of curved glass. Anyway, the modularity of the Cosmos C700P invites you to extreme modding!

Technical details:

    Dimensions: 306 x 651 x 639 mm (W x H x D)
    Material: steel, aluminum, plastic
    Weight: 22.2 kg
    Color: Black, Metallic
    Form factor: E-ATX, ATX, Mini-ATX, Micro-ATX
    Total fan possible:
    3x 140/120 mm (front)
    1x 140/120 mm (back)
    2x 140/120 mm (underside)
    3x 140/120 mm (cover)
    Preinstalled:
    2x 140 mm 1,200 rpm (front)
    1x 140 mm 1,200 rpm (back)
    Fan control:
    6x 3-pin fan connectors (3x occupied)
    3x RGB LED connectors (2x occupied)
    radiators:
    Front:
    120 mm, 140 mm 240 mm, 280 mm, 360 mm (with ODD cage)
    420 mm (without ODD cage)
    top:
    120 mm, 140 mm, 240 mm, 280 mm (with ODD cage)
    360 mm (without ODD cage)
    Bottom:
    120 mm, 140 mm, 240 mm
    Back:
    120 mm, 140 mm
    Maximum graphics card length:
    320 mm (with HDD cage)
    490 mm (without HDD cage)
    Height CPU fan: 198 mm
    Filter: front, cover, power supply
    Drive Bays:
    2x 5.25 inches (1x occupied)
    2x 2.5 / 3.5 inches (HDD cage) 2x 2.5 inches (rear mainboard tray)
    up to 9x 3.5 in / 2.5 in possible (front, without ODD cage)
    Power supply: 1x standard ATX (optional)
    Expansion Slots: 8
    I / O panel:
    1x USB 3.1 type C
    4x USB 3.0 Type A
    1x fan / RGB LED controller
    1x each audio in / out