Cool master Silencio S600 Steel Silent Midi-Tower - black [MCS-S600-KN5N-S00]

With its simple and modern design, the housing fits well into any setup. The interior offers plenty of space for powerful hardware and good ventilation.

The features of the Cooler Master Silencio S600 Steel at a glance:
- Chic midi tower for ATX, Micro-ATX and Mini-ITX mainboards
- Pre-installed noise insulation made of vinyl and foam
- Steel front door that can be fitted on both sides
- Space for two dual radiators
- Two pre-installed silent fans
- Prepared for clean cable management

Cooler Master Silencio S600 Steel: Flexible midi tower with sound insulation
Up to five case fans can be installed in the Cooler Master Silencio S600 Steel: 120 mm fans can easily be attached to the rear and two 120 or 140 mm fans to the front. There is space for a 120 or 140 model on the cover, by removing the 5.25-inch slot, a second fan can be attached to the housing cover. From the factory, the Silencio S600 Steel offers two pre-installed Silencio FP 120-millimeter-type fans that are controlled by a PWM signal. There is space for a maximum of 167 millimeter high CPU cooler in the case.

The Cooler Master Silencio S600 Steel also offers several options for installing custom and full water cooling: a 120 radiator can be attached to the rear wall and the front is prepared for a 240 or 280 mm radiator. There is space for a 120 or 140 millimeter radiator on the lid; if the 5.25-inch cage is omitted, a 240 dual radiator can also be installed there.

Cooler Master Silencio S600 Steel: design and noise insulation
The no-frills housing offers clear shapes and smooth surfaces and is completely black on the inside and outside. The midi tower has been developed with low operating noise in mind and is equipped with extensive vinyl and foam noise insulation that dampens vibrations and volume.

Both the side parts and the front door made of steel are insulated on the inside. The lid has a removable cover that can be removed for ventilation. There are dust filters in the front, in the bottom and in the lid. The front door can be mounted with the hinges on the left or right so that it pivots in the desired direction when opened. The I / O panel is located on the right side of the housing cover and contains two USB 3.0 ports, a combined audio port and an SD card reader.

Space for drives and components
The interior of the Cooler Master Silencio S600 Steel offers space for motherboards in ATX, Micro-ATX and Mini-ITX form factors and a total of seven expansion slots that can be used, for example, for graphics cards up to 398 millimeters long. There is space for up to 160 millimeters long ATX power supplies under the power supply cover.

The HDD cage offers space for a total of three 3.5-inch drives. One 3.5-inch and two 2.5-inch drives can be mounted on the back of the mainboard tray and three additional 2.5-inch SSDs can be installed on the power supply cover. The ODD cage has space for a 5.25-inch drive.

Technical specifications:
Dimensions: 209 x 470.5 x 478 mm (W x H x D)
Material: steel, plastic
Weight: 8.43 kg
Color: Black
Format: ATX, Micro-ATX, Mini-ITX
Total fans possible:
2x 120 / 2x 140 mm (front)
2x 120 / 2x 140 mm (cover; without ODD cage)
1x 120 mm (back)
Pre-installed:
1x 120 mm Silencio FP (front, 800-1,400 rpm, PWM)
1x 120 mm Silencio FP (rear, 800-1,400 rpm, PWM)
Radiator mountings (partial waiver of HDD, ODD and / or fan slots):
1x max. 240/280 mm (front)
1x max. 240 mm (cover; without ODD slot)
1x max. 120 mm (back)
Dust filter: front, bottom, lid

Drive Bays:
1x 5.25 inch (external; ODD cage)
1x 3.5 inch (internal; behind MB tray)
3x 3.5 inches (internal; HDD cage)
5x 2.5 inches (internal)
Power supply (optional): ATX
Expansion slots: 7
I / O panel:
2x USB 3.0
1x 3.5 mm jack (4-pin / TRRS, audio in / out)
1x SD card reader
Maximum graphics card length: 398 mm
Maximum CPU cooler height: 167 mm
Maximum power supply length: 160 mm