Cool master MasterCase MC500P TG Midi-Tower - black [MCM-M500P-KG5N-S00]

Product Information - MasterCase MC500P TG Midi-Tower - black
Cooler Master complements its MasterCase range with another feature-rich and attractive case: the MasterCase MC500P. Thus, the renowned manufacturer is still on top and presents with the new case a modern midi tower in a modular design with a side panel made of tempered glass and extensive configuration options.

The interior has a modular design, and is extremely generously dimensioned and offers space for motherboards up to the E-ATX format, long gaming graphics cards and appropriate air or water cooling for high-performance hardware. The cooling performance is particularly good due to the numerous ventilation options.

The features of the MasterCase MC500P at a glance
- Modern modular Midi-Tower in black
- Side part made of tempered glass
- Mesh grille on the front for better airflow
- Graphics cards up to a maximum of 412 mm
- Two large 140mm fans in the front
- Additional 140 mm rear fan pre-installed
- Space for radiators up to 280/360 mm

The MasterCase MC500P from Cooler Master in detail
The MasterCase MC500P is designed to mount E-ATX, ATX, Micro-ATX or Mini-ITX motherboards. This housing has plenty of space in the interior and thus the possibility to accommodate up to three radiators. In addition to the classic slot on the back for a 120 or 140 mm heat exchanger, a 280/360 mm radiator can be installed in the front. The lid has a 240 or 280 mm radiator space. To install a surge tank or pump, there is an appropriate mounting location on the front removable part of the power supply cover. However, if cooling with water is not required, the Cooler Master MasterCase MC500P also offers more than enough cooling potential.

Two large 140mm fans already occupy one of the three slots in the front. Alternatively, three 120 mm fans can be accommodated here. A 140 mm fan is already pre-installed on the back, while two 120 mm fans can be mounted in the lid. Dust filters on the bottom, front and lid protect the hardware inside the case.

Ample space for media
Internally, there are slots for two 3.5-inch drives in the drive cage, which is located under the power supply cover, in which of course 2.5-inch drives can be accommodated. The cage can also be removed to make room for the pump and expansion tank to clear custom loops. Above are two external bays for 5.25-inch drives, which can be replaced with an optional HDD cage. Underneath, another HDD cage is attached, which is already enclosed in the case. All in all, a maximum of ten 3.5-inch drives can be accommodated in the MC500P. For 2.5-inch drives, there are two more slots on the back of the motherboard tray. With optional SSD brackets, two additional SSDs can be accommodated on the power supply cover.

A lot of sense for details
Behind the left side wall made of tempered glass, the classically furnished interior shows and convinces with fine detailed solutions. There is plenty of space for graphics cards, but it can be up to 412 millimeters long if there is no HDD cage in the way, otherwise the cards can be 296 millimeters long. The power supply is hidden by a panel for a tidy interior and cool air is sucked through dust filters in the front and bottom. An opening in the mainboard tray allows changing the cooler with the mainboard mounted.

The processing is very high quality and the room layout leaves room for a potent system with lots of hardware. The CPU cooler may be 190 mm high and also for the power supply, the MasterCase MC500P offers more than enough space even for very powerful specimens. For the cable management remained 25 to 35 millimeters of space.

Nestled between the front and the stylish lid with slanted air inlet is the expansive I / O panel, which has two more slots for USB 3.0 and USB 2.0 Type A and each one microphone or headphone jack significantly more than the usual connections ,

Technical specifications:
- Dimensions: 235 x 548 x 512 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: 11.3 kg
- Color: Black
- Format: E-ATX (12 "x 10.7"), ATX, Micro-ATX, Mini-ITX
Fan:
- 1x 120 mm / 140 mm (back)
- 3x 120mm / 140mm (front)
- 2x 120 mm / 140 mm (top side)
Preinstalled:
- 2x 140 mm (front, 1,200 rpm)
- 1x 140 mm (rear, 1,200 rpm)
Radiator Mountings:
- 1x max. 280/360 mm (front side)
- 1x max. 140 mm (back)
- 1x max. 280 mm (top)
Drive Bays:
- 2x 5.25 inches externally
- 4x 2.5 inches / 3.5 inches internally
- 4x 2.5 inches internally
- Power supply (optional): ATX
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0 Type A
- 3x USB 2.0
- 2x audio
- Maximum graphics card length: 412 mm
- Maximum CPU cooler height: 190 mm