Cool master MasterBox NR200P MAX Mini-ITX Case, Tempered Glass - black [NR200P-MCNN85-SL0]

Despite its small volume of 18.3 L, the case offers space for a full-fledged gaming graphics card, which is installed vertically using the enclosed riser cable. A complete water cooling and an SFX power supply are already pre-installed to facilitate assembly. In addition to two steel side panels, a third side panel made of tempered glass is also included in the scope of delivery in order to stylishly stage the installed hardware.

The features of the Cooler Master MasterBox NR200P MAX Mini-ITX case at a glance:
- Modern Mini-ITX enclosure for high-performance hardware
- Space for a mini-ITX format motherboard
- Complete water cooling and fully modular SFX power supply pre-installed
- Three vertical expansion slots for graphics cards up to 33 cm
- Suitable for dual radiators and up to four fans
- Includes riser cable with PCIe 4.0
- Detachable GPU panel for easy assembly
- Additional side panel made of tempered glass
- MasterBox NR200P MAX: Mini-ITX enclosure with pre-installed components

This Mini-ITX enclosure from Cooler Master comes with a pre-installed 850-watt power supply that is certified with 80 PLUS Gold and delivers enough power for high-end components. In addition, the housing comes with integrated complete water cooling, which simplifies assembly.

The corresponding 280 mm radiator is pre-installed in the
lid. An additional 240 mm radiator can be mounted in the floor. Furthermore, the case offers up to 4 places for fans: two 120s on the bottom and two 120s or 140s on the lid. Modular dust filters on the bottom, lid and both sides keep the interior clean.

Space for drives and components
A mini-ITX format motherboard can be installed on the motherboard tray. The graphics card may be up to 33 cm long and three slots high. Vertical installation on the three expansion slots is done using the supplied riser cable (PCIe 4.0 x16). Thanks to the detachable GPU panel, installation is very simple. The Cooler Master MasterBox NR200P MAX offers a total of four locations for installing drives: Three 2.5-inch SSDs can be mounted on the power supply cage.

The bottom of the case offers space for a 3.5-inch hard drive. Optionally, another 3.5-inch data carrier can be mounted on the radiator holder. In addition to power and reset switches, the I / O panel also offers two USB 3.0 ports and a combined 3.5 mm jack for headphones.

Technical details:
Dimensions: 377 x 185 x 292 mm (W x H x D)
Material: steel, plastic, tempered glass
Volume: 18.3 L
Color: Black / Gray
Format: Mini-ITX (max. 170 x 180 mm)
Pre-installed complete water
cooling:
Radiator: Dimensions: 318 x140 x 27
mm
(L x W x H) Material: Aluminum Color: Black

CPU cooler / pump: Dimensions: 80 x 48 x 76 mm
(W x H x
D) material
Water block: plastic, tempered
glass Material Base plate: Copper Volume:

Fan: Type: 2x 140 mm (SickleFlow
PWM) speed: 650 - 1,400
rpm +/- 5%) Flow volume:
max. 113.83 m³ / h
Static pressure: max.2.25 mmH2O Volume: 10 - 27 dB (A)
Connection: 4-pin PWM
Compatibility:
Intel sockets: LGA 2066, 2011 (-V3), 2011, 1200, 1151, 1150, 1155,
1156, 1700 AMD sockets: AM4, AM3 +, AM3, AM2 +, AM2, FM2 +, FM2, FM1
Pre-installed SFX power supply
(modular): Dimensions: 125 x 64 x 100 mm (W x H x D)
Color: Black
Fan: 92 mm
Fan speed: N / A
Efficiency: ~ 90/92/89% @ 20/50/100% load at 230V, 80 PLUS Gold certificate
Noise level: N / A
Active PFC
Form factor: SFX
Power: 850
W + 3.3V:
20 A + 5V:
20 A + 3.3V &
+ 5V: 120 W + 12V: 70.8 A / 849.6
W.
-12V: 0.3 A / 3.6 W + 5Vsb: 3 A / 15 W.
Connectors (detachable):
1x 24-pin
1x 4 + 4-pin

1x 8-pin 4x
6 + 2-pin PCIe 8x SATA
4x 4-pin Molex
Protection: OVP, OPP, SCP, OCP, UVP, OTP, Surge and Inrush Protection
Security: cTUVus, TUV, CE, BSMI, FCC, CCC, EAC, RCM, KCC, CB
Lifespan: approx. 100,000 h
Fan (case):
2x 120 mm / 2x 140 mm (lid)
1x / 2x 120 mm (bottom, with / without 3.5 inch HDD on the bottom)
Radiator mounts: 1x max. 240/280 mm (lid; 280 mm pre-installed)
Filters: lid, bottom, left side, right side
Drive bays:
1x / 2x 3.5 inches
(without radiator) 3x 2.5 inches
Power adapter: SFX / SFX-L
Expansion slots: 3
I / O panel:
2x USB 3.0
1x 3.5 mm jack (4-pin, TRRS)
Maximum graphics card dimensions: 336 x 160 x 75 mm (L x W x H)
Maximum CPU cooler height: 67 mm
Maximum power supply length: 130 mm
Scope
of supply: 1x Cooler Master MasterBox NR200P
MAX
case 1x tempered
glass side panel 1x steel side panel with ventilation 1x complete water cooling (280 mm radiator, 2 x 140mm SickleFlow fan, Gen 3 Cooler Master Pump CPU block)
1x V850 SFX 850 watt power supply, 80 PLUS Gold
1x riser cable (PCIe 4.0 x 16)
Manufacturer's
warranty:
Housing: 2 years
Complete water cooling: 2 years Power supply: 10 years