Loading Products..
Customer Reviews
Best 30mm thick 360 radiator!
I did a lot of research before selecting this radiator. I am so happy with it.
If you can fit a Nemesis GTX (at a chunky 54mm thick) then go for that one.
But if, like me, you need to watch the thickness in your case, and can't go with more than a 30mm thick radiator, then pick this.
Plenty of comparisons on reddit etc, show this outperforms Corsair XR5 and EK Coolstream.
I have two of these in my loop, and they are phenomenal!
outstanding
in the past I've always used alphacool which are a good product but not as good as this buy a long way.
the build quality is better and more importantly the overall cooling ability is much better I have i7 7820 clocked @ 4.5 gizmo idle temp 27
outstanding
in the past I've always used alphacool which are a good product but not as good as this buy a long way.
the build quality is better and more importantly the overall cooling ability is much better I have i7 7820 clocked @ 4.5 gizmo idle temp 27
very impressed
first experience of a H W rad and its unbelievable i`m able to cool my cpu with fans set to 50 % with lower temps considering changing other rads in system to H W . The performance has to be seen to be belied a slim 360 rad better than a 45mm full copper rad
was able to clock i7 7800x to 5 ghz with decent temps (delided cpu) with fans at 50% at 4.7 ghz max temp 67degree in summer at 50% fan speedother rad was 85 degree
very impressed
first experience of a H W rad and its unbelievable i`m able to cool my cpu with fans set to 50 % with lower temps considering changing other rads in system to H W . The performance has to be seen to be belied a slim 360 rad better than a 45mm full copper rad
was able to clock i7 7800x to 5 ghz with decent temps (delided cpu) with fans at 50% at 4.7 ghz max temp 67degree in summer at 50% fan speedother rad was 85 degree
Difficult to find fault
After a lot of research I went with these rads in my build, (2x360, 1x 240) as in tests they gave excellent cooling despite the narrow depth. In use the results are good, but the fin density benefits from high static pressure, I used ML 120’s. Installation was easy especially given how thin they are, but be careful of the fins, they are many and easy to damage. Also one of the rads required a lot of flushing to remove all the debris (over an hour) but this was the only one like this.
Customer Rating
Submitted a rating of 5 out of 5.