This is a model of Bitspower in "Ice Blue", a blue, transparent tube that is perfect for illuminating, including two screw-POM-lids. These are sealed with two rubber rings over the acrylic tube. This is comparable to thick and therefore very stable. The top cover of the normally vertically installed expansion tank has a single 1/4 inch thread.
Particularly interesting: on the inside of the inlet opening into three individual openings, which are aligned laterally. This makes for a more eye-catching when the upper port is used as feed and the water flows into three individual rays against the acrylic body.
The lower lid POM contrast, has three 1/4 inch thread. One of these openings is connected with an internal flow tube. This is used as a feed, when the inlet and outlet are both out of the bottom of the reservoir. The feed is, however, from the top, one of the other two openings to be used as a process, because at a water level below the level of otherwise Störmungsrohres air is sucked.
The expansion tank is supplied with two closure plugs with which each unneeded two openings are sealed. One of these plugs is transparent and can accommodate an optional lighting kit, so effective light-mods can be realized.
The package also includes two mounting rings. These are simply pushed over the tube and compressed to the desired location. Thanks straight outside and corresponding holes they can be screwed flexible. The screws required for installation and the required ports are not included.
Material: Acrylic, POM
Color: Blue (Ice Blue)
Length (with / without lid): 170/150 mm
Diameter (exterior / interior): 60/50 mm
Thread: 4x 1/4 inch
1x transparent sealing plugs (for lighting)
1x sealing plug nickel silver