To connect the individual components of the water cooling system to choose the right connections and the adequate number is essential. Otherwise the installation will quickly into a frustrating experience if the assembly fails at the wrong or a few joints and been delayed due to his.
Bitspower offers a comprehensive range of this, which holds for each claim the right solution - whether adapters, direct hose connections, angle or distributor. Execution is always solid, and has a sealing ring. Ensure that the connections remain tight and long term durability.
This is a straight and blood-red 1/4 inch connector (fitting) for tubes with 7/16 inch or 11 mm inner diameter in the real hi-flow design. Because no nut is used, can be any hose strengths and thus outside diameter can be used.
To fix the hoses on the safe side, we recommend connecting a cable tie or a hose clamp.
Note: We recommend the installation and removal of the terminal, a 15-mm open-end wrench. Please note that some may be attracted to the use of the tool connector by hand. Our tool can be found here.
Color: blood red
Thread: 1/4 inch
Suitable for: 11 mm hose (inside diameter)