BitFenix Enso Mesh RGB Midi Tower, Tempered Glass - White [BFC-ESM-150-WWWGK-RP]

The tidy interior design wipes out media in the PSU Shroud and behind the motherboard tray, providing great airflow, water cooling support and two pre-installed 120-millimeter fans. In addition, the case with plenty of room even for E-ATX motherboards, clean cable management and easily removable dust filters can convince the whole line. The mesh front improves the airflow again, no matter if fan or radiator is used.

An overview of the features of the BitFenix Enso Mesh Midi-Tower
- Extremely stylish Midi-Tower for motherboards up to E-ATX
- ASUS Aura Sync compatible RGB lighting & controller
- Large side panel in tempered glass with sound insulation
- I / O panel with 2x USB 3.0 & HD audio in / out
- Support for two radiators in 360/280 and 120 mm format
- 2x 3.5 / 2.5 inch & 3x 2.5 inch disk slots
- 2x 120mm fan pre-installed - 6 total possible
- Graphics cards up to 34 cm in length & CPU cooler up to 16 cm

The features of the BitFenix Enso Mesh Midi-Tower in detail
From the outside, the case captivates with its futuristic look in the form of a matt white surface, a large tempered glass side window and, of course, the RGB lighting integrated in the front panel. With a compatible ASUS motherboard, this can be easily configured by software and synchronized with other RGB components in elaborate lighting effects. It can also be controlled manually via an integrated controller and connected to other RGB components.

Inside, the compact midi tower can accommodate motherboards ranging from Mini ITX to E-ATX. Two 3.5- or 2.5-inch drives can be stored in a cage in the PSU Shroud, while three 2.5-inch disks disappear behind the motherboard tray. Hardware and cooling components are presented behind the viewing window made of four-millimeter thick tempered glass in a particularly clean look.

The back of the case is equipped with a 120-millimeter RGB fan, while behind the mesh front, a model without lighting ensures a powerful air flow. In addition, you can attach two 120 mm fans in the lid and three in the front. Two 140-millimeter models are also possible in the front. The ventilation openings in the front, bottom and lid are all equipped with removable dust filters without tools.

For noise reduction, the Tempered Glass Panel is sealed with rubber and the opening in the lid is a mesh cover for increased Airflow included. In the front, the Enso can accommodate radiators in 360- or 280-millimeter format up to 35 mm thickness and offers space in the rear for a 120-mm counterpart. CPU cooler may be up to 16 inches high and powerful graphics cards fit up to a length of 34 centimeters in the interior.

Technical details:
- Dimensions: 210 x 489 x 454 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: about 7 kg
- Color white
- Form factor: E-ATX (up to 272 mm width), ATX, Micro-ATX, Mini-ITX

Total possible fan:
- 3x 120 / 2x 140 mm (front)
- 1x 120 mm (back)
- 2x 120 mm (cover)

Preinstalled:
- 1x 120 mm (front side)
- 1x 120 mm static RGB (back)

Radiator Mountings:
- 1x 360 mm or 1x 280 mm (front)
- 1x 120 mm (back)
- Filter: cover, front, PSU

Drive Bays:
- 2x 3.5 / 2.5 inches (internal)
- 3x 2.5 inches (internal)
- Power supply: 1x standard ATX up to 160 mm (optional)
- Expansion Slots: 7

I / O panel:
- 2x USB 3.0 (internal connection)
- 1x each audio in / out
- Maximum graphics card length: 340 mm
- Maximum CPU cooler height: 160 mm

Connections RGB controller:
- 1x 4-pin RGB
- 2x 3-pin RGB
- 1x front button
- 1x SATA power cable