BitFenix Pandora Core Micro-ATX Case - Black Window [BFC-PAN-300-KKWN1-RP]

The incidentally tools removable side panels, of which the left is equipped with this variant with a large window, reach into the front area and found the transition a flattering round eyes. The actual front surface of black glossy plastic contrasts wonderfully with the roughened Alloy behind and acts like a protective shield black half hidden. Unobtrusive of the I / O area with two USB 3.0 ports in the front cover area is recessed, behind which extends a black hole grid surface. At the front BitFenix ​​dispensed with in this lower-cost core variant on the "ICON" LCD screen and the normal version equips the front instead with a silver aluminum logo. 
 

The interior of only just over 5 kg light BitFenix ​​Pandora turns out to be pleasantly spacious, next to the PCB in the form factor Mini-ITX or Micro-ATX can also efficient power supplies are housed (up to 180 mm) and pixel cars to 35 cm in length. For an active stream of air, the two pre-placed and protected with removable dust filters 120mm Spectre fans are responsible, one in the top and one at the front, where one could still come under further. But here is also quite wonderful a heat exchanger in the 240-mm dual format be used, as he is about to be found in high-performance all-in-one water cooling systems. 
 

An optional removable "Cable Management Bracket" in the front area of the soil, the power supply cable leads under the Airflow through and in addition to the improvement of cooling and Aufgeräumheit the additional purpose of being able to carry on its outer side a 2.5-inch SSD, which then is visible through the window. Another 2.5-or 3.5-inch drive can be screwed directly underneath in the ground and the front cover there is another hard drive slot, while the front motherboard tray comes with an additional 2.5-inch Drive . Thus, the drive division is unusual, but quite effective and more than adequate for a multimedia PC. 
 

Usability has BitFenix ​​total can be very high start at Pandora, the dust filters keep magnetically and can be removed accordingly easily, the aluminum side panels are also tool-less removable and the thumbscrews of the five PCI slots are in favor of a closed look behind the left window side panel hidden, so you do not immediately zoom comes with your fingers, but shall BitFenix ​​the housings with an Allen wrench, with which you can loosen the screws comfortable. In addition, the Pandora is pre-provisioned with mainboard spacers and has a large cutout in the tray for easy cooler change. The BitFenix ​​Pandora Core is both outside and inside solid! 
 

Technical Details: 
 

Dimensions: 160 x 420 x 465 mm (W x H x D) 

Weight: 5.25 kg 

Material: steel (Body), aluminum (side panels) 

Color: Black 

Form Factor: Micro-ATX, Mini-ITX 

Fan total possible: 

2x 120 mm (front) 

1x 120 mm (cover) 

Thereof pre-installed: 

1x 120 mm (front) 

1x 120 mm (rear) 

Radiator Mountings (partial waiver of HDD and / or fan slots): 

1x max. 240 mm (front) 

Filters: front cover, AC adapter (removable) 

Drive bays: 

2x 3.5 inch (internal) 

3x 2.5 inch (internal, 1x instead of 3.5 inches) 

Power supply: 1x Standard ATX (optional, max 180 mm length.) 

Expansion Slots: 5 

I / O panel: 

2x USB 3.0 (internal connection) 

1x per Audio In / Out 

Maximum video card length: 350 mm 

Maximum CPU cooler height: 145 mm 

Maximum PSU length: 180 mm