BitFenix Nova Mesh TG A-RGB Midi Tower, Tempered Glass - Black [BFC-NVM-300-KKGSK-4A]

Numerous modular dust filters ensure that dust does not penetrate into the housing, there is space for dual and triple radiators and with the ingenious cable routing it is easy to make the interior presentable.

The features of the BitFenix Nova Mesh TG A-RGB midi tower:
- Stylish midi tower from BitFenix for motherboards to E-ATX
- Side part made of tinted tempered glass
- Up to 34 cm long gaming graphics cards
- Four pre-installed 120 A-RGB fans, a total of six possible
- Space for 240mm radiator on the lid and up to 280/360 on the front
- Space for 2x 3.5 / 2.5 and 3x 2.5-inch drives

BitFenix Nova Mesh TG A-RGB: Stylish midi tower with excellent cooling
The front panel with the fine mesh grid perfectly combines the cabinet design with the requirement of fresh air access. Up to three 120 or two 140 fan can be installed on the front, three 120s with digitally addressable RGB LED lighting are already installed there. Two 120-millimeter fans can be installed on the top and another 120-model on the back wall, which is also pre-installed and equipped with digitally addressable RGB LEDs. CPU coolers must not exceed 160 millimeters in height.

Four 120-millimeter-thick BitFenix Specter fans with digitally addressable RGB lighting are pre-installed at the factory. Thanks to the fine mesh front and the dust filter on the lid, the interior remains clean. Of course, instead of the fan appropriate radiators can be installed on the front of a 360 or 280er. At the top there is still a little space for a 240 mm radiator.

Space for hardware components and drives
The BitFenix Nova Mesh TG A-RGB is suitable for motherboards in the E-ATX format with a maximum width of 272 millimeters and smaller boards. A large recess in the mainboard tray allows easy and convenient installation of CPU coolers with backplate, without having to remove the motherboard. Expansion cards can be mounted in the seven slots with quick-release screws.

Three 2.5-inch drives find their place on the back of the motherboard tray. Two 2.5 "/ 3.5" drive carriers are available in the HDD cage under the power supply cover. There is also a space up to 160 millimeters long ATX power supply. This offers the advantage of a separate fresh air access through the bottom of the housing. Also at this point a dust filter protects against the ingress of dirt and dust. In addition, the power supply cover hides unsightly cable clutter, which would otherwise be visible through the tinted tempered glass side panel.

Technical details:
- Dimensions: 210 x 460 x 437 mm (W x H x D)
- Material: steel, ABS plastic, tempered glass
- Color: Black
- Weight: approx. 7.2 kg
- Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX
Fan possible:
- 3x 120mm / 2x 140mm (front)
- 2x 120 mm (cover)
- 1x 120 mm (back)
Preinstalled:
- 3x 120 mm A-RGB (front)
- 1x 120 mm A-RGB (back)
Radiators possible:
- 1x max. 360/280 mm (front)
- 1x max. 240 mm (lid)
- 1x max. 120 mm (back)
drives:
- 2x 2.5 / 3.5 inches (internal)
- 3x 2.5 inches (internal)
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0
- 1x each HD-Audio In / Out
- 1x power button
- 1x reset button
- Power adapter: standard ATX format (optional)
- Maximum graphics card length: 340 mm
- Maximum CPU cooler height: 160 mm
- Maximum network part length: 160 mm
- Maximum radiator depth (front): 35 mm
- Maximum radiator width (front): 141 mm
- Maximum radiator depth (cover): 27 mm
- Maximum radiator width (cover): 125 mm