BitFenix Aurora Midi-Tower - black Tempered Glass Window [BFC-ARA-300-KKWSK-RP]

In addition, it offers a wide space for air or water cooling systems and for media and gaming hardware. Useful and cool features like dust filter, plenty of space for cable management and an RGB LED lighting for the SSD on the front of the motherboard trays round out the already impressive package from wonderful.
The key features of the BitFenix Aurora midi tower at a glance:

High quality black housing with SofTouch surface
Cool LED lighting the front-SSD with RGB controller (ASUS Aura Ready)
Two side panels of tinted tempered glass
Plenty of space for watercooling
Five fans mountable, 1x 120mm preinstalled
Space for motherboards E-ATX form factor and small
Four 3.5-inch and two 2.5-inch disk slots
CPU cooler with a maximum height of 160 mm
Graphics cards up to 400 mm and Power Supplies to 220 mm length
Design, toughened glass side windows and lights in BitFenix Aurora

Incentive and self-claim when BitFenix Aurora it was obvious to make a full-fledged housing which integrates as a multimedia center or as a gaming PC optically perfectly into its surroundings. With a black BitFenix Aurora on the Lowboard - or next to the desk - each room tastefully decorated is even finer, more elegant, yet distinctive. The designers have this primarily achieved through the two side panels, which are each made of a piece of tempered glass and the surface is very dark tinted. In combination with the matt black SofTouch surface, this results in an optical and haptic pleasure, which has no equal in this price range.

The way tools removable side panels allow despite strong tint an insight to the built-up inside the hardware, is there especially when working with a LED lighting. Front and lid waive the Aurora contrast to a straight line and are designed to be relatively peppy. This allows the mesh inserts, but a better air supply or air exhaust in the housing or out of the housing.

Equipped with a certified ASUS Aura RGB LED controller, the SSD can on the previous page of the motherboard trays present in an appropriate manner. The illuminable SSD bracket gives the user the possibility thus the SSD to illuminate in any desired color and adjust the rest of the color of the system. A truly unique features, which it has not seen before in this form. A button on the I / O panel, the light can also turn off, but who wants that?
Air or water cooling in BitFenix Aurora

For an active air flow, a pre-installed at the rear 120 mm fan is responsible, which could be supplemented by two additional 120-mm or 140-mm fan in the front and on the cover. The full equipment of Aurora with up to five fans would produce an excellent airflow which cools down very potent gaming hardware accordingly reliable.

Thanks to the relatively large size of the midi tower but can also obstruct an effective water cooling. An up to 280 mm large radiator has its place either at the front or in the lid. If necessary, even has enough room for two at the same time built 280 mm radiators. To have no problems with the planning of the watercooling circuit, this version of the Aurora midi tower also contains a handy holder for a reservoir. This holder can be quickly and easily installed with normal screws or thumbscrews. Note here is that in the case of installing a pump on the lower HDD cage, the space for graphics cards in the lower PCIe slots is greatly restricted. In one of the top slots, however, fits up to a 44 cm long graphics cards at the pump installed.
Good facilities and plenty of space for gaming hardware

The interior of the nearly 10 kg BitFenix Aurora proves spacious pleasant, because in addition to the main board in the form factor E-ATX, ATX, Micro-ATX or Mini-ITX can also efficient power supplies (up to 220 mm), pixel Boliden to 40 cm in length and CPU cooler can be accommodated up to 16 cm height.

A total of four slots for 3.5-inch disks are located in the Aurora. For two HDD cages are installed, which can accommodate two of these disks. If necessary, these can even be removed to make room for other components. A 2.5-inch SSD can be mounted on the front of the motherboard tray and optimally illuminated by the RGB LED lighting. Two other 2.5-inch disk can also be mounted on the back of the motherboard tray, which incidentally plenty (20-25 mm) is for meaningful cable management.

Usability has BitFenix at Aurora total can start very high, the dust filters keep magnetically and can be removed accordingly easy, the side parts are also tool-less removable as the thumbscrews of the seven PCI slots. In addition, the Aurora is pre-provisioned with mainboard spacers and has a large cutout in the tray for easy exchange cooler. The I / O panel in the front part of the lid has two USB 3.0 and USB 2.0 ports, HD audio ports, and power & reset button.

Technical details:
Dimensions: 215 x 490 x 520 mm (W x H x D)
Weight: 10.2 kg
Material: Steel (Body), ABS plastic, glass (tinted)
Color: Black
Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Fan total possible:
2x 120/140 mm (front)
1x 120 mm (rear)
2x 120/140 mm (lid)
Of preinstalled:
1x 120 mm (rear)
Radiator Mountings:
1x max. 280 mm (front)
1x max. 120 mm (rear)
1x max. 280 mm (lid)
Filter: Front, Power Supply
Drive Bays:
4x 3.5 inch (internal)
3x 2.5 inch (internal)
PSU 1x standard ATX & EPS 12V
Expansion Slots: 7
I / O panel:
2x USB 3.0
2x USB 2.0
1x per Audio In / Out
1x per power and reset button
Maximum video card length: 400 mm
Maximum CPU cooler height: 160 mm
Maximum power supply Length: 220 mm