For this, however, the corresponding screens must be VESA compliant and have mounting holes on the back either with a spacing of 75 x 75 mm or 100 x 100 mm. If this is the case, the Z2-Pro monitor mount may be used.
The mounting system consists of a black powdered steel column, which is fixed by a clamping screw on the rear edge of the desk. In the column two flexible arms are stuck with three joints, which in any amount - up to 350 mm - can be locked.
On the last member of an arm is the mounting plate that is bolted to the display unit. By the flexible arm so that the distance to the pillar and to the rear edge of the table 100 to 390 mm can be varied.
The Z2-Pro mount is compatible with monitors with a size 13 to 27 inches, their respective weight not exceeding 10 kg. Thanks to the elaborate mounting system opens up a variety of settings to adapt the workplace to your own needs.
Thus, the displays are height adjustable, can be rotated horizontally through 360 degrees (Swivel function), can also rotate 360 degrees vertically (Pivot) and up to 15 degrees up or down tilt (tilt function).
In addition, a USB hub is with four USB 3.0 ports directly on the support column and thus at the foot of the Z2-Pro mount.
Weight: 4.55 kg
Mounting system: VESA
VESA standard 75 x 75 mm / 100 x 100 mm
Monitor Compatibility: 2x 13 to 27 inches, max. 10 kg per display
Distance to the support column: 100 to 390 mm
Height adjustment: Yes (column height 350 mm)
Vertical rotation (pivot): yes (360 °)
Horizontal Rotation (Swivel): yes (360 °)
Angle of inclination (tilt): yes (+/- 15 °)
4x USB 3.0