Aquacomputer aquastream - Ultimate Version [41108]

Key features of aquastream Ultimate include:
- an intelligent pump control to reduce vibration and noise
- direct operation without a PC thanks to integrated buttons and an OLED display (128 x 64 pixels)
- Individually adjustable control behavior and automatic control of fan output and pump speed
- integrated water temperature sensor
- Infinitely adjustable 12 W fan output for analog 3-pin fans or 4-pin PWM fans
- aquabus interface
- Connections for external flow and temperature sensors
- Alarm output to protect the PC
- Acoustic alarm signaling by alarm buzzer
- Firmware updates via integrated USB port
- 12 V power supply via SATA plug

In close cooperation with the well-known pump manufacturer Eheim, a completely new pump was developed to meet the special requirements of PC water cooling: The aquastream pump. In contrast to previous solutions, this pump is a pure 12V pump. nowhere are higher voltages generated. The power requirement for the Ultimate version is between 3 and 25 watts. The performance of the pump is at least identical to the well-known Eheim 1046, on which the Aquastream XT is based, and the smoothness could even be improved by the use of a 32-bit microcontroller and complex control electronics.

Among the special updates of the Ultimate version include u.a. an OLED display and associated buttons, with the aid of which various settings can be made without the PC. The mechanics are based on the proven Eheim technology, which was already used in the predecessor variants. The aqua computer Aquastream XT USB 12V pump in the Ultimate version achieves a maximum head of 4.2 mWs and manages a capacity of 300 liters per hour.

Note: Unfortunately, this pump does not have the usual W / A G1 / 4-inch threads, so it is recommended to use an adapter set. (e.g., WAPU-092 in the Caseking Store)

Technical details:
- Dimensions: 52 x 72 x 118 mm (W x H x D)
- Weight about 485 grams
- Capacity approx. 300 liters / h
- Delivery height max. 4.2 mWs
- Maximum pump pressure: 445 mbar
- Connections: 1x G3 / 8 ", 1x G1 / 8"
- Power connection: 4-pin Molex
- Voltage 12 volts
- Power consumption 3 - 25 watts
- Cable length approx. 1.2 m