Aquacomputer aquainlet per 150ml with nano coating [34065]

Reservoir and pump form a unit after assembly. It also tracks the mounting plate in the reservoir will continue in order for the first time a stable mounting of the plate under the focus of the unit is possible. This allows easy use of decoupling rubber or a Shoggy sandwich.

The reservoir is sealed to the pump inlet when plugging by an O-ring, two latches snap into the pump housing and secure the reservoir against pulling and twisting, accidental removal of the bayonet lock of the pump is thus excluded. Two displaced by 90 ° connection thread (front and side) allow for flexible mounting of the return line, so that the reservoir can be optimally used in tight spaces.

The reservoir aquainlet per 150ml is closely related to the aqualis series and also equipped with a tube of borosilicate glass, which in contrast to the frequently used for tube reservoir acrylic glass a very high hardness and scratch resistance, very low thermal expansion and excellent chemical and has thermal resistance. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and lid are made of Delrin, top and bottom are connected by a steel bar.

Technical details:

     - Material: Delrin, borosilicate glass
     - Dimensions without pump: about 56 x 67 x 198 mm
     - Thread: 4x 1/4 inch
     - Filling volume: 150 ml
     compatibility:
     - aquastream
     - Eheim 1046 pump and identical
     Scope of delivery:
     - A surge tank
     - Three plugs G1 / 4 (pre-assembled)