Antec Striker Phantom Gaming Edition, Mini-ITX Showcase - White [0-761345-80033-4]

The design was exclusively adapted to the gaming product series from ASRock, which includes mainboards, graphics cards and memory. The Striker housing was developed exclusively for use with water cooling, which is why the interior is divided into several chambers. The front and both side panels are made of floating tempered glass, there is no cover and the graphics card is mounted directly behind the front cover.

The Antec Striker Mini ITX Case in the Phantom Gaming Edition at a glance:
Mini-ITX case from Antec
Special edition in phantom gaming design
Including riser cable for mounting the graphics card in the front
Side parts and front cover made of tempered glass
White exterior panels and black interior
2x USB 3.0 type A and 1x USB 3.1 type C
Space for two 240mm radiators
Bays for up to two 2.5-inch drives
Antec Striker: Showcase in the Phantom Gaming special edition

Thanks to the cooperation between Antec and ASRock, the design of the Striker case has been exclusively adapted to the well-known ASRock product series. With suitable products such as motherboard, graphics card and RAM, a particularly stylish system with a uniform design language can be implemented.

The Antec Striker is a thoroughbred showcase and was designed for the installation of powerful hardware. 240 millimeter radiators can be installed in the right chamber as well as on the back of the housing. The case is designed for use with AiO or custom water cooling.

With the Striker, Antec deliberately does without the option of installing expansion cards in the usual way, which is why there is hardly any space for air coolers. Because the graphics card is displayed in the front of this case and mounted with the connections pointing downwards. The riser cable required for this is included in the scope of delivery. The mainboard in mini-ITX format is installed with the I / O panel turned downwards. The user can choose between ATX and SFX power supplies with a maximum depth of 160 millimeters. There is a carrier for two 2.5-inch SSDs, each 7 millimeters high, which are mounted vertically one above the other.

The outer panels are made of four millimeters thick, slightly tinted tempered glass and allow views from the front and to both sides. The Antec Striker has no cover and is open on all sides due to the floating assembly of the side panels. White covers protect the power supply in the bottom of the case from prying eyes and allow some cables to be laid out of sight.

Note: Exact dimensions are provided for the graphics card in this housing, which must not be exceeded. If available, please check your graphics card for compatibility with the Antec Striker.

Technical details:
- Dimensions without feet: 230 x 410 x 420 mm (W x H x D)
- Material: steel, aluminum, tempered glass
- Weight: 7.47 kg
- - Color: white (exterior panels), black (chassis)
- Form factor: Mini-ITX
- Total fans possible:
- 2x 120 mm (rear)
- 2x 120 mm (right chamber)
- Radiator mountings:
- 1x 240 mm (rear)
- 1x 240 mm (right chamber)
- Drive bays:
- 2x 2.5 inches (max. 7 mm height, internal)
- Power supply: 1x standard ATX / SFX (optional)
- Expansion slots: 2
- I / O panel:
- 2x USB 3.0 Type A (USB 3.1 Gen 1, internal connection)
- 1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
- -2x 3.5 mm jack (3-pin, TRS, audio in / out)
- Maximum dimensions of the graphics card: 320 x 150 x 60 mm (L x W x H)
- Maximum length of the network part: 160 mm
- Maximum radiator depth:
- Right chamber: 40 mm
- Rear: not limited (outdoor installation)