The front and both side parts are made of floating tempered glass, there is no lid at all and the graphics card is mounted directly behind the front cover.
The features of the Antec Striker-Mini-ITX case at a glance:
- Mini-ITX case from Antec in white
- Including riser cable for mounting the graphics card in the front
- Side parts and front cover made of tempered glass
- White exterior panels and black interior
- 2x USB 3.0 Type A and 1x USB 3.1 Type C
- Space for two 240 radiators
- Bays for up to two 2.5-inch drives
- Antec Striker: Showcase for Mini-ITX mainboards
The Antec Striker is a thoroughbred showcase and was designed for the installation of powerful hardware. 240 millimeter radiators can be installed in the right-hand chamber and on the back of the housing. The housing is designed for use with AiO or custom water cooling.
Antec specifically does not use the Striker to install expansion cards in the usual way, which is why there is hardly any space for air coolers. Because the graphics card is on display in this case in the front and mounted with the connections facing downwards. The riser cable required for this is included in the scope of delivery. The mainboard in mini ITX format is installed with the I / O panel turned down. The user can choose between ATX and SFX power supplies with a maximum depth of 160 millimeters. There is a carrier for two 2.5-inch SSDs, each 7 mm high, which are mounted vertically one above the other.
The outer panels consist of four millimeter thick, slightly tinted tempered glass and allow insights from the front and from both sides. The Antec Striker has no lid and is open on all sides due to the floating mounting of the side walls. White covers protect the power supply in the bottom of the case from prying eyes and make it possible to lay some cables invisibly.
Note: For this graphics card, exact dimensions are provided for this housing, which must not be exceeded. If available, please check your graphics card for compatibility with the Antec Striker.
Dimensions without feet: 230 x 410 x 420 mm (W x H x D)
Material: steel, aluminum, tempered glass
Weight: 7.47 kg
Color: white (outer panels), black (chassis)
Form factor: Mini-ITX
Total fans possible:
2x 120 mm (back)
2x 120 mm (right chamber)
1x 240 mm (back)
1x 240 mm (right chamber)
2x 2.5 inches (max. 7 mm height, internal)
Power supply: 1x standard ATX / SFX (optional)
Expansion slots: 2
I / O panel:
2x USB 3.0 Type A (USB 3.1 Gen 1, internal connection)
1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
2x 3.5 mm jack (3-pin, TRS, audio in / out)
Maximum dimensions of the graphics card: 320 x 150 x 60 mm (L x W x H)
Maximum power supply length: 160 mm
Maximum radiator depth:
Right chamber: 40 mm
Back: not limited (outdoor installation)