Details
In addition, the P110 Luce with its side part made of tempered glass is a real eye-catcher. The case not only skilfully stages high-end hardware, but also shows off its stylish side with its brushed aluminum front and RGB lighting. In the interior fits a lot of hardware whose temperature can be kept in check with a water cooling. Lots of housing for little money: Antec shows how to do it.
The features of the Antec P110 Luce at a glance:
Chic Midi-Tower by Antec with side part made of tempered glass
Space for ATX, Micro ATX and Mini ATX motherboards
Brushed aluminum front with RGB lighting
Up to five 120- or four 140-mm fans possible, 1x 120-mm fan preinstalled
Eight seats for 3.5- or 2.5-inch drives
I / O panel with 2x USB 3.0, HD audio, HDMI and RGB control
Graphics card length of 390 mm, CPU cooler up to 165 mm
Lots of space for drives and graphics cards
The core of this stylish case is made of sturdy steel. The interior is tidy and spacious. The power supply cover hides the cables and provides space for two 2.5-inch or four 3.5-inch drives on the lid. In addition, the cover is decorated with the Antec logo, which is illuminated with a white LED. Under the power supply cover behind the optional power supply, which can be up to 20 inches long, there is a classic HDD cage with bays, which in turn can accommodate two 3.5-inch and 2.5-inch drives. Finally, there is a support for two more 2.5-inch drives on the back of the motherboard bracket.
On the right side of the interior, a support is placed behind which cables can be hidden. At the same time there is a height-adjustable support for overlong graphics cards attached. There are eight slots for expansion cards on the back and, unusually in this price range, the possibility of vertically installing a graphics card. There is room for a 120 mm fan above the slots, which Antec will deliver as well.
Well ventilated
The front is equipped with a brushed aluminum cover and an Antec logo with RGB LED lighting. The side vents provide a neat airflow that can be ignited by three 120mm or two 140mm fans. A magnetic dust filter ensures that the interior remains clean. A 120 mm fan is already installed. If you prefer radiators for water cooling, you can install a 360er there. Another 280 mm radiator can be attached to the lid. As a result, alternatively, two 120- or 140-mm fans have space. The interior can be seen through the tinted glass panel made of four-millimeter-thick tempered glass, which is fastened by four knurled screws decorated with Antec logo.
In addition to the dust filter behind the front, there is one more each on the lid and one on the bottom, which can be removed laterally. The unusually populated I / O panel is attached to the top of the front cover. There are in addition to two USB 3.0 ports and an HDMI slot for VR headsets. There is also a switch that controls the RGB lighting on the front panel. Two additional RGB LED strips with 4-pin plugs can be connected to the enclosed controller.
Technical details:
Dimensions: 230 x 489 x 518 mm (WxHxD)
Material: SECC steel, tempered glass, aluminum, plastic
Color: Black
Form factor: ATX, Micro-ATX, Mini-ITX
Drive bays: 8x 3.5 or 6x 2.5 inches (internal)
Fan (possible):
2x 140 mm / 3x 120 mm (front)
1x 120 mm (back)
2x 140/120 mm (cover)
Fan (pre-installed):
1x 120 mm (front side)
1x 120 mm (back)
Filter: front, power supply
Radiator-Mounting: 1x 360 (front), 1x 280 mm (cover), 1x 120 (back)
Expansion Slots: 8 (horizontal), + 2 (vertical)
Power supply (optional): ATX
I / O panel:
2x USB 3.0
1x HDMI
1x RGB controller
1x each audio in / out
Dust filter: front, lid, bottom
Maximum graphics card length: 390mm
Maximum CPU cooler height: 165 mm
Maximum network part length: 200 mm