Antec New Gaming NX400 Midi Tower, RGB, Tempered Glass - Black [0-761345-81040-1]

The housing is also suitable for water cooling, because a 360 mm radiator can be installed in the front and a 240 mm radiator in the lid. The innovative design of the tempered glass side panel and the stylish RGB lighting in the front are the highlights of the Antec NX400.

The features of the Antec NX400 Midi-Tower at a glance:
- Stylish ATX midi tower by Antec in black
- Stunning view of the hardware through the tempered glass side panel
- Stylish, addressable RGB LED lighting in the front
- Up to six 120 mm fans possible
- Space for 360 and 240 radiators
- Graphics cards up to 330 mm & CPU cooler up to 170 mm
- 1x 3.5 "/ 1x 2.5" / 3.5 "and 4x 2.5" drives

The Antec NX400 midi tower in detail
The Antec NX400 features a stylish retro-look bezel with built-in RGB LED lighting and mesh. The case is completely in black and is dominated by an angular design language. The left side panel has a large area of tempered glass and provides a view of the installed hardware.

Options for air and water cooling
In total, up to six case fans can be installed in the NX400: three 120 or two 140-inch fans can be installed in the front. There are two 140mm or 120mm fans in the lid and a 120mm or 140mm model on the back panel. By default, a 120er ARGB fan is pre-installed on the rear panel of the case.

Also, the installation of water coolers was thought: In the front there is space for a 360er radiator, in the lid, a 240 heat exchanger can be accommodated and on the rear wall, a 140er radiator can be attached.

Space for hardware components and drives
Graphics cards can be up to 330 millimeters long. CPU coolers can be installed in the Antec NX400 with a height of up to 170 mm, power supplies can be up to 170 mm long and disappear under a power supply cover. This makes for a tidy interior, as cables can be hidden easily and elegantly.

Under the power supply cover also sits a hard drive cage for up to two 3.5-inch disks. Two additional 2.5-inch SSD mounting locations are located on the motherboard tray, one behind the motherboard tray and one on the power supply cover. In addition to ATX, Micro ATX and Mini-ITX motherboards, up to seven expansion cards can be installed in the housing.

The I / O panel is attached to the top of the Midi Tower. The panel has a USB 2.0, two USB 3.0 ports and two audio jacks. Three buttons for power, reset and the control of the integrated RGB LED lighting are also available here.

Technical details:
- Dimensions: 230 x 465 x 425 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 5.3 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 120 / 2x 140 mm (front side)
- 1x 140 / 1x 120 mm (back)
- 2x 140 / 2x 120 mm (cover)
Preinstalled:
- 1x 120 mm, ARGB (back)
Radiator Mountings:
- 1x 360 mm (front)
- 1x 240 mm (cover)
- 1x 140 mm (back)
Drive Bays:
- 1x 3.5 inches (internal)
- 1x 3.5 / 2.5 inches (internal)
- 4x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0
- 1x USB 2.0
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (audio-in)
- 1x power button
- 1x reset button
- 1x LED mode button
- Maximum CPU cooler height: 180 mm
- Maximum graphics card length: 330 mm
- Maximum network part length: 210 mm