Antec New Gaming NX310 Midi-Tower, RGB, Tempered Glass - black [0-761345-81031-9]

The housing is also suitable for water cooling, because a 240 mm radiator can be installed in the front. The elegant design, the tempered glass side panel and the stylish RGB lighting in the front are the highlights of the Antec NX310.

The features of the Antec NX310 Midi-Tower at a glance:
- Chic and stylish ATX midi tower by Antec in black
- Breathtaking view of the hardware through tempered glass side panel
- Stylish, addressable RGB LED lighting in the front
- Up to six 120 mm fans possible, two 120 series fans pre-installed
- Space for a radiator up to 280 mm in size in the front
- Graphics cards up to 320 mm & CPU coolers up to 165 mm
- 2x 2.5 "/ 3.5" HDDs and 4x 2.5 "SSDs

The Antec NX310 Midi Tower in detail
The Antec NX310 has an elaborately designed front panel with angular shapes, generous air inlet with mesh paneling and integrated RGB LED lighting. On the left side, a tempered glass side panel provides insights into the black interior of the midi tower.
Air and water cooling options
A total of up to eight case fans can be installed in the NX310: three 120 or two 140 fans can be installed in the front. There is room for two 140 or 120 fans in the lid. Two additional 120 mm fans can be installed on the power supply cover and a 120 model is provided on the rear wall.

Two fans are installed at the factory: a 120 ARGB fan in the front and a 120 model without lighting on the rear wall of the housing. The installation of water coolers was also considered: there is space for a 280 radiator in the front and a 120 heat exchanger can be attached to the rear wall.

Graphics cards can be up to 320 millimeters long. CPU coolers can be installed in the Antec NX310 with a height of up to 165 mm, power supplies can be up to 170 mm long and disappear under a power supply cover. This ensures a tidy interior, since cables can be hidden easily and elegantly.

There is also a hard drive cage under the power supply cover for up to two 2.5 or 3.5 inch data carriers. There are four further mounting locations for 2.5-inch SSDs on the mainboard tray. In addition to ATX, mATX and Mini-ITX mainboards, up to seven expansion cards can be installed in the housing.

The I / O panel is attached to the top of the elegant case. There are one USB 3.0, two USB 2.0 ports and two audio sockets on the panel. Three buttons for power, reset and the control of the integrated RGB LED lighting are also available here.

Technical details:
Dimensions: 215 x 460 x 430 mm (W x H x D)
Material: steel, plastic, tempered glass
Weight: approx.5.1 kg
Color: Black
Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
3x 120 / 2x 140 mm (front)
1x 120 mm (back)
2x 140 / 2x 120 mm (cover)
2x 120 mm (bottom)
Pre-installed:
1x 120 mm, ARGB (front)
1x 120 mm (back)
Radiator Mountings:
1x 280 mm / 240 mm (front)
1x 120 mm (back)
Drive Bays:
2x 3.5 / 2.5 inches (internal)
4x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
1x USB 3.0
2x USB 2.0
1x per HD audio in / out
1x power button
1x reset button
1x LED mode button
Maximum CPU cooler height: 165 mm
Maximum graphics card length: 320 mm
Maximum power supply length: 170 mm