Antec New Gaming NX210 Midi Tower, RGB, Tempered Glass - Black [0-761345-81020-3]

The housing is also suitable for water cooling, because a 240 mm radiator can be installed in the front. The elegant design with front and side parts made of tempered glass and the stylish RGB lighting in the front are the highlight of the NX210 by Antec.

The Antec NX210 midi tower at a glance
- Chic and stylish ATX midi tower by Antec in black
- Stunning view of the hardware through tempered glass side panel
- Including four pre-installed 120er ARGB LED fans
- Space for up to 240 mm radiator in the front
- Graphics cards up to 310 mm & CPU cooler up to 155 mm
- 1x 3.5 inches and 3x 2.5 inches

The Antec NX210 midi tower in detail
The Antec NX 210 is a midi tower for motherboards in ATX format. The case is completely black inside and out and has a sleek design with clean shapes and smooth surfaces. The front and the left side part are made of tempered glass and provide insights into the interior of the housing and the hardware installed therein.
Options for air and water cooling
The Midi Tower also has plenty to offer inside: a 240 mm radiator can be installed behind the front and another 120 mm radiator can be found in the rear wall. When using air cooling, three 120mm fans can be mounted in the front and one 120mm fan in the back panel. CPU coolers must not exceed a height of 155 millimeters. Four 120 GB ARGB LED fans are preinstalled at the factory.

Graphics cards can be up to 310 millimeters long and power supplies up to 220 mm long. The power supply is installed in the lid of the housing, above the mainboard. There is room for a 3.5-inch and a 2.5-inch drive in the case back. In addition, two 2.5-inch SSDs can be installed on the back of the MB tray.

The I / O panel is attached to the top of the elegant case. The panel has a USB 3.0, two USB 2.0 ports and two audio jacks. In addition to the power and reset buttons, a switch is also prepared for controlling the RGB LED lighting. A corresponding controller can be purchased separately.

Technical details:
- Dimensions: 220 x 455 x 395 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 4.8 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 120 (front)
- 1x 120 mm (back)
Preinstalled:
- 3x 120 mm, ARGB (front)
- 1x 120 mm, ARGB (back)
Radiator Mountings:
- 1x 240 mm (front)
- 1x 120 mm (back)
Drive Bays:
- 1x 3,5 (internal)
- 3x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x 3.5 mm jack (audio out)
- 1x 3.5 mm jack (Mic-In)
- 1x power button
- 1x reset button
- 1x LED button
- Maximum CPU cooler height: 155 mm
- Maximum graphics card length: 310 mm
- Maximum network part length: 220 mm