The housing is also suitable for water cooling, because a 360 mm radiator can be installed in the front and in the cover. The stylish front design with flap, the side panel made of tempered glass and the three pre-installed front fans with ARGB lighting are the highlights of the Antec Dark Phantom DP502 FLUX.
The features of the Antec Dark Phantom DP502 FLUX at a glance:
Stylish midi tower from Antec in black
With front flap and a 5.25-inch drive bay
View of the hardware through the tempered glass side panel
Seven PCI slots for graphics cards
Five pre-installed fans (3x 120 ARGB) + RGB controller
Space for two 360 radiators
Graphics cards up to 405 mm & CPU coolers up to 175 mm
3x 2.5 "/ 3.5" HDDs and 3x 2.5 "SSDs
The Antec Dark Phantom DP502 FLUX Midi-Tower in detail
The Antec Dark Phantom DP502 FLUX has a stylish front with a flap and generous air inlets. A 5.25-inch drive can be installed behind the front flap. The case is completely black. The left side part has a large area of tempered glass.
A total of five fans are pre-installed in the case. The front is equipped with three 120 mm fans with addressable RGB lighting. A 120 fan is installed on the power supply cover and in the rear wall. The lighting of the ARGB fans can be controlled with the RGB controller, which is also included, or via the software on the mainboard.
The installation of water coolers has also been considered: In the front there is space for a 360 mm radiator, a 360 mm heat exchanger can also be accommodated in the cover and a 120 mm radiator can be attached to the rear wall.
Space for hardware components and drives
Graphics cards can be up to 405 millimeters long. CPU coolers can be installed in the Antec Dark Phantom DP502 FLUX with a height of up to 175 mm, power supplies can be up to 205 mm long and disappear under a power supply cover. This ensures a tidy interior, as cables can be hidden easily and elegantly.
There is also a hard drive cage for up to three 3.5-inch data carriers under the power supply cover. There are three more mounting locations for 2.5-inch SSDs on the mainboard tray. In addition to ATX, mATX and Mini-ITX mainboards, up to seven expansion cards can be built into the housing.
The I / O panel is attached to the top of the elegant case. There are two USB 3.0 ports and two audio sockets on the panel. Three buttons for power, reset and the control of the integrated RGB-LED lighting are also available here.
- Dimensions: 220 x 486 x 463 mm (W x H x D)
- Material: steel, plastic, tempered glass
-Weight: approx 7.55 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 / 2x 140 (front)
- 1x 120 mm (rear)
- 2x 120 mm (power supply shroud)
- 3x 120 / 2x 140 mm (without ODD bracket) / 2x 120 / 140mm (without ODD), 2x 120 mm / 1x 140 mm (with ODD) (cover)
- Of which pre-installed:
- 3x 120 mm, ARGB (front)
- 1x 120 mm (power supply shroud)
- 1x 120 mm (rear)
- Radiator mountings:
- 1x max. 360 mm (front)
- 1x max. 360 mm (without ODD bracket, max. Length radiator 405 mm) (cover)
- 1x max. 120 mm (rear)
- Drive bays:
- 3x 3.5 / 2.5 inch (internal)
- 3x 2.5 inches (internal)
- Fan / RGB controller:
- 6x 3-pin RGB (5VDG)
- 6x 3-pin fan
- 1x LED button housing
- 1x MB-Sync (5VDG)
- Power supply: 1x standard ATX (optional)
- Expansion slots: 7
- I / O panel:
- 2x USB 3.0 1x 3.5 mm jack (audio out)
-1x 3.5 mm jack (audio-in)
- 1x power button
- 1x reset button
- 1x LED mode button
- Maximum CPU cooler height: 175 mm
- Maximum graphics card length: 405 mm
- Maximum length of the network part: 205 mm