The Wing Boost 3 ARGB combines many advantages of the famous predecessors with a circular, digitally addressable RGB LED lighting in the outer frame. The eponymous "wing boosts", small increases on the impeller suction side, reduce air turbulence. The fan therefore works more quietly, especially at higher speeds, than conventional fan designs would allow.
The features of the Alpenföhn Wing Boost 3 ARGB fan at a glance:
140 millimeter fan with digitally addressable RGB lighting
Hydrodynamic bearing for high performance, quiet operation and long durability
Optimized rotor blades provide the perfect balance between contact pressure and airflow
Speed range from 400 to 1,500 rpm
4-pin PWM connector
compatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome
Wing Boost 3 ARGB: Powerful 140 mm fan
The Wing Boost 3 ARGB is a PWM-controlled, 140 mm fan that is equally suitable for mounting on housings, processor coolers and radiators. The fan operates in a speed range between 400 and 1,500 revolutions per minute, whereby it achieves an enormous delivery volume of 134 m³ / h and a static pressure of 2.07 mm H2O.
The hydraulic bearing, which reduces friction noise to a minimum, and the rubber decouplers in the fan frame guarantee whisper-quiet operation, even in the low speed range. The Wing Boost 3 RGB generates a maximum noise level of 25.6 decibels under full load.
Addressable RGB LED lighting in the frame
The Alpenföhn Wing Boost 3 ARGB is equipped with digitally addressable RGB LED lighting. The manufacturer has integrated two rings shining in 16.8 million colors into the fan frame, which throws a light glow on the impeller and can be connected to the mainboard or corresponding controllers via a 3-pin RGB connection. The Wing Boost 3 ARGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.
Thanks to the Y-switch, which is integrated in the PWM connector, up to three Wing Boost 3 fans can be connected in series and controlled via a single PWM slot on the mainboard. In addition, an adapter is included, which can supply the fan with Molex on 3-pin with power, but then without the possibility to control the speed.
- Dimensions: 140 x 140 x 25 mm (W x H x D)
- Material: plastic, rubber
- Color white
- Volume: max.25.6 dB (A)
- Speed: 400 - 1,500 rpm
- Funding volume: max.134 m³ / h
- Static pressure: 2.07 mm H2O
- Voltage: 12 V.
- Voltage range: 7 - 13.2 V
- Nominal power: 2.76 W.
-Input current: 0.23 A
- 4-pin PWM
- 3-pin RGB (5VDG)
- Illumination: digitally addressable RGB LEDs (16.8 million colors)
Scope of delivery:
- 1x Alpenföhn Wing Boost 3 RGB
- 4x screws
- 4x decoupling pins
- 1x Molex / 3-pin adapter