The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside.
Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing.
Colour: Deep Black
Diameter: 26 mm
Height: 23 mm
Thread length: 5 mm
HardTube size: 16 mm
Compatibility: PETG, acrylic, brass and glass tubes
Weight: 0,042 kg
Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Deep Black