Alphacool Eisblock Aurora GPX-N Acryl Active Backplate 3090/3080 TI HOF [13046]

The Alphacool Eisblock Aurora GPX-N Acryl Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acryl GPX-N GPU custom water cooler (see compatibility information). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled and thus a significant increase in cooling performance can be achieved.

Connection
There are 2 different options for integrating the active backplate into the water circuit:

Option 1
The cooler has an inlet and outlet with a G1/4" internal thread on the top. With the right connections and hoses/hard tubes, the backplate can easily be connected to the water circuit and be integrated.

Option 2
The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x distributor with 5/3mm hose (Art. 1022250), the active backplate can be integrated into the water circuit in a simple and space-saving manner. This variant is a sensible choice if there is little space in the PC housing and it is difficult to achieve optimal hose routes. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in conjunction with Alphacool Eiswolf 2 AIOs!)

The connection options are very flexible with both variants, since the inlet and outlet design can be freely selected to a limited extent.

Brilliant lighting
Six addressable digital RGB LEDs are directly embedded and run laterally completely along the cooling block. The effect is lighting that encloses the entire cooling block, creating unique lighting effects. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.

Compatibility:
- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF with backplate (article number: 11967)

Technical specifications
L x W x H: 295 x 125.25 x 13.3mm
Material back plate: Copper, nickel-plated
Material cooler: Acrylic
Connections water cooling: 2 x G1/4" / 2 x 5/3mm hose connection
Lighting: 6 x Digitally addressable RGB LEDs
Power connection digital aRGB LEDs: 3-pin JST (male & female switch)
Voltage digital aRGB LEDs: 5V
Maximum operating temperature: 60℃
Pressure tested: 0.8 bars
Weight: 1013g or 1290g boxed

Note on use
Please only use in conjunction with clear, transparent water cooling liquids. The particles and additives in pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in the manufacturer's warranty also becoming void.