Alphacool EisPumpe VPP755 - Single Edition [13294]

The VPP755 Eispump dispenses with the spherical bearing and opts instead for a ceramic shaft that makes for quieter operation. The motor’s coils are now on the outside instead of inside. All of this provides more stability, which results in less vibration. It also means the power consumption is cut nearly in half. Yet the VPP755 Eispump still boasts a 4m maximum head for higher performance. The VPP755 Eispump is also distinctly quieter than the classic, well-known D5 pump while providing the same performance.

One of the innovations of the VPP755 Eispump is its many control options. The 4-pin molex connection provides the power, and plugs directly into the power supply.

If desired, the 3-pin connection can be used to read the pump’s RPM. This can be connected to the corresponding motherboard or to a fan controller.

Through the 4-pin PWM connection, the pump can be controlled by PWM as usual. The RPM can be read through the 4-pin PWM connection as well.

On the backside of the pump there is a small rotary switch, the same as on the VPP655 Solo. This switch has 5 levels for manually controlling the pump. The unique thing here is that the manual control and PWM control can now work together – a system patented by Alphacool. Using the rotary switch, the general maximum RPM for the pump can be set, which then cannot be exceeded by the PWM control. Practically, this means that if the pump is set to level 3 with a maximum RPM of 3200, you can also only reach a maximum RPM of 3200 through the PWM control.

Now every user can set exactly how the pump should run, and in what RPM range, even if the PWM control on the motherboard or fan controller has few settings.

Visually, some changes have also been made. The VPP755 Eispump is about a centimetre shorter than the classic D5 pump and has an aluminium cap. The pump looks elegant and fits perfectly into a modern system.

The Alphacool VPP755 Eispump is an improvement over the classic D5 pump VPP655 in every respect. In no area is it weaker or louder than its predecessor, and it offers new options for controlling the pump according to your wishes.

Technical Specifications

    Dimensions (DxH): 60 x 53,5mm
    Cable length: 50cm
    Standard voltage: 12V DC
    Power consumption: 14W
    Accepted voltage: 8-13v DC
    Pressure at 12V: 4m head
    Maximum flow: 350l/h
    Pump fluid: water, water/glycol mixture
    Maximum system temperature: 65°C
    Power connection: 4-pin Molex
    Speed sensor signal: 3-pin
    PWM signal: 4-pin
    Special features: adjustable to five levels
        Level 1: 1800 RPM
        Level 2: 2500 RPM
        Level 3: 3200 RPM
        Level 4: 3900 RPM
        Level 5: 4500 RPM

Scope of Delivery

    1x Alphacool Eispumpe VPP755 - Single Edition