Aerocool V3X RGB Midi-Tower - black [ACCM-PV11014.11]

 Exactly in this notch one proposes now also with the V3X-Serie, which includes solid, space-saving Midi-Tower with its interior in the classical layout, which bring along the most important features and can be absolutely outwardly absolute.

The features of the Aerocool V3X RGB at a glance:
- Stylish midi tower for motherboards up to ATX
- Two side-mounted RGB strips on the front
- Three 5.25-inch built-in slots at the front
- Graphics cards up to 350 mm, CPU cooler up to 150 mm
- A pre-installed 80mm fan on the back
- Three free 120mm fan slots

Lots of space for optical drives
The V3X RGB impresses, for example, with its chic black front, the bottom of a beefy "mesh snout" and is dominated by glossy black 5.25-inch bezels. In two of them optical drives can be installed. The drive slots are crowned by an I / O panel with USB 3.0 once, twice USB 2.0, audio connections, status LEDs and power and reset buttons. The highlight of the case are certainly the two RGB LED strips that light up on the right and left in the lower area of the front. A total of six modes and seven colors can be adjusted via the centrally installed switch.

The tidy look convinces with pleasant symmetry and clear lines. In the left-hand side panel, there are two fan slots in a slightly curved area, which can be occupied by optional 120 mm models. On the other hand, CPU coolers can be up to 150 mm high, which is astonishing for the slim case and, above all, the bulge. That's why graphics cards with a length of up to 350 millimeters fit into the Aerocool V3X RGB.

Good airflow
Another 120 mm fan slot is located behind the mesh in the front and a pre-installed 80 mm fan at the rear handles the removal of heated air. An efficient airflow is so easy to achieve and cools the installed components accordingly. In addition to the mentioned maximum of two 5.25-inch drives up to three 3.5-inch hard drives and a 2.5-inch SSD in the Aerocool V3X RGB under.

The interior is completely black, such as the tray, the ATX Micro-ATX, and Mini-ITX motherboards and has a large cutout for easy radiator change without board removal. In addition, of course, the drive bay, in which hard disks conventionally and SSDs partly screwed laterally. The optional power supply is located at the top back and contributes actively with its fan to the hot air delivery.

Technical details:
- Dimensions: 194 x 414.5 x 412 mm (W x H x D)
- Material: steel, plastic
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
- 1x 120 mm (front side)
- 1x 80 mm (back)
- 2x 120 mm (left side panel)
Preinstalled:
- 1x 80 mm (back)
Drive Bays:
- 2x 5.25 inches (external)
- 3x 3.5 inches (internal)
- 1x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x each audio in / out

- Maximum graphics card length: 350 mm
- Maximum CPU cooler height: 150 mm