Aerocool Splinter Duo Midi-Tower - black window [ACCM-PB26033.11]

The design allows a clear view of the built-in hardware. The eye-catching front with a vertical RGB-LED strip offers a generous mesh area for an extended airflow. Additional fan slots on the power supply cover help cool powerful graphics cards. With the three pre-installed 120 mm RGB fans, the case offers good cooling ex works and is a real eye-catcher.

The features of the Aerocool Splinter Duo at a glance:
Midi-Tower for ATX, Mini-ATX, Micro-ITX
Side panel made of tempered glass for an unobstructed view of the interior
Chic front with RGB LED strips and mesh
Three pre-installed 120 mm RGB fans
Space for two 3.5-inch and up to four 2.5-inch drives
360 mm radiator in the front possible

Aerocool Splinter Duo: Chic front in wave design with mesh
The Aerocool Splinter Duo offers a striking design with showcase elements in the tried and tested compact format of a midi tower. The chic front with an RGB LED strip is partly made of mesh to improve the airflow. RGB fans can shine through the grille on the front.

Cooling with air and water
Up to 161 mm high CPU coolers and a total of eight 120 mm case fans can be installed in the Aerocool Splinter Duo: Three 120 mm fans or two 140 mm fans can be installed in the front, two 120 mm fans can be found the power supply cover. A 120 mm fan is located in the rear, where a 120 mm RGB fan is pre-installed ex works. Two more pre-installed RGB fans occupy the slots in the lid. The front can accommodate a radiator up to 360 mm in size. Heat exchangers up to 240 mm in size can be installed in the cover. There is space for a 120 mm radiator at the rear. The spacious housing is therefore also suitable for use with a custom or AIO water cooling system.

Up to five data storage devices can be installed in the Aerocool Splinter Duo: A drive cage for one 2.5 or two 3.5 inch drives is located under the black power supply cover. Two 2.5-inch data carriers can also be attached to the front of the mainboard tray. For the installation of high-performance graphics cards, a length of 326 mm is envisaged, without a fan installed on the front. With 24 mm, there is enough space for cable management. A hub with six 6-pin connections, as used by some Aerocool fans, is included to control the RGB-LED lighting. There are also two 3-pin connections for ARGB LEDs. Colors and effects can then be controlled either via a switch on the I / O panel or via a 3-pin connector for digitally addressable RGB LEDs.

Technical details:
Dimensions: 210 x 519 x 404 mm (W x H x D)
Material: steel (chassis), tempered glass (side panel), plastic (front)
Color: Black
Form factor: ATX, Mico-ATX, Mini-ITX
Total fans possible:
Front: 3x 120 / 2x 140 mm
Back: 1x 120 mm
Power supply cover: 2x 120 mm
Lid: 2x 120 mm
Of which pre-installed:
2x 120 mm (RGB, cover) 1x 120 mm (RGB, rear)
Radiator mountings:
Front: 1x max. 360 mm
Lid: 1x max. 280 mm
Back: 1x max. 120 mm
Drive bays:
1x 2.5 or 2x 3.5 (internal)
2x 2.5 inches (internal, mainboard tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0 type A
2x audio (1x in, 1x out)
Maximum graphics card length: 326 mm (without front fan)
Maximum CPU cooler height: 161 mm
Maximum power supply length: 166 mm (including cable)