Aerocool Quartz Pro Black Full Tower Glass Front and Side Panel 3 x 12cm RGB Fans ETA. 2nd of October [ACCF-PB06043.11]

You can simultaneously control and monitor up to five fans via the P7-H1 which also includes a fan RPM controller switch. The hub helps convert PWM signal from the motherboard allowing you to control even a 3-pin fan. The Quartz Pro is designed to have maximum airflow support with up to 10 fan slots available for installation. If liquid cooling is your thing, then install your choice of 240 or 360 radiator in the front, side or top panel. Install extra-long graphics cards up to 470mm and 185mm tall for CPU cooler. It comes with steel HDD trays that have anti-vibration pads and supports up to four 3.5” HDDs and three 2.5” HDDs/SSDs. Easily fit a PSU up to 200mm and for improved cable management there’s ample space of 36.6mm where you need it. For easy cleaning and improved maintenance, the dust filters for the PSU and the front are easily removable.

Key Features
16.8 million colours and 4 colour modes with Aerocool P7-H1 (Project7 – Hub1) software.
Simultaneously control and monitor up to five PWM fans via P7-H1 (Project7-Hub1).
Full tempered glass front and side panels to showcase your rig.
Includes three RGB P7-F12s (Project 7 – Fan12cm).
36.6mm of space for better cable management.
Includes fan RPM controller switch.
Steel HDD tray with anti-vibration pad.
Supports high-end graphics cards up to 470mm.
Supports CPU cooler up to 185mm.
Supports 240 or 360 radiator in the front, side or top panel.
Supports up to four 3.5” HDDs and three 2.5” HDDs/SSDs.
Supports PSU up to 200mm.
Maximum Air cooling support with up to 10 fans.

Case Specifications
Form Factor: Full Tower
Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Front, Top
Body Material: 1.0mm SGCC
Front Bezel Material: Plastic
Side Panel: Window
Internal Cable Management Depth: 366mm
External Bays: 1 x 5.25” External
Internal Bays: 4 x 3.5” Internal
3 x 2.5” Internal
Drive Bay Notes: 4 (Compatible with 2.5" HDD/SSD)
Expansion Slots: 10 x Full Size
Cooling Front: Space For 3 x 120mm RGB LED Fans (Included)
Cooling Top: Space for 3 x 120mm Fans (Not Included)
Cooling Rear: Space For 1 x 140mm Black Fan (Included)
Cooling Side: None
Cooling Bottom: None
Fan Controllers: 1 Fan Controllers, controlling up to
3 fans in total
IO Ports: 2 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 470mm
CPU Cooler Maximum Height: 185mm
Front Bezel Colour: Black
Body Colour: Black
System Cabinet Features:
PSU Included: No