Aerocool Gladiator Duo Midi-Tower - black window [ACCM-PB27033.11]

The design allows a clear view of the built-in hardware. The eye-catching front with a vertical RGB-LED strip offers generous air inlets above and below for an extended airflow. Additional fan slots on the power supply cover help cool powerful graphics cards. With the three pre-installed 120 mm RGB fans, the case offers good cooling ex works and is a real eye-catcher.

The features of the Aerocool Gladiator Duo at a glance:
Midi-Tower for ATX, Mini-ATX, Micro-ITX
Side panel made of tempered glass for an unobstructed view of the interior
Chic front with RGB LED strips and mesh
Three pre-installed 120 mm RGB fans
Space for two 3.5-inch and up to three 2.5-inch drives
360 mm radiator in the front possible

Aerocool Gladiator Duo: Chic front in wave design with mesh
The Aerocool Gladiator Duo offers a striking design with showcase elements in the tried and tested compact format of a midi tower. The chic front with an RGB LED strip offers generous air inlets at the top and bottom for extended airflow. A fine grid prevents too much dust from entering the housing.
Cooling with air and water
Up to 161 mm high CPU coolers and a total of eight 120 mm case fans can be installed in the Aerocool Gladiator Duo: three 120 mm fans or two 140 mm fans can be installed in the front, two 120 mm fans can be found the power supply cover. A 120 mm fan is located in the rear, where a 120 mm RGB fan is pre-installed ex works. Two more pre-installed RGB fans occupy the slots in the lid.

The front can accommodate a radiator up to 360 mm in size. Heat exchangers up to 240 mm in size can be installed in the cover. There is space for a 120 mm radiator at the rear. The spacious housing is therefore also suitable for use with a custom or AIO water cooling system.

Spacious interior with plenty of space for hardware
A total of five data storage devices can be installed in the Aerocool Gladiator Duo: Under the black power supply cover there is a drive cage for one 2.5 or two 3.5 inch drives. Two 2.5-inch data carriers can also be attached to the front of the mainboard tray. For the installation of high-performance graphics cards, a length of 326 mm is envisaged, without a fan installed on the front.

With 24 mm, there is enough space for cable management. A hub with six 6-pin connections, as used by some Aerocool fans, is included to control the RGB-LED lighting. There are also two 3-pin connections for ARGB LEDs. Colors and effects can then be controlled either via a switch on the I / O panel or via a 3-pin connector for digitally addressable RGB LEDs.

Technical details:
Dimensions: 210 x 519 x 404 mm (W x H x D)
Material: steel (chassis), tempered glass (side panel), plastic (front)
Color: Black
Form factor: ATX, Mico-ATX, Mini-ITX
Total fans possible:
Front: 3x 120 / 2x 140 mm
Back: 1x 120 mm
Power supply cover: 2x 120 mm
Lid: 2x 120 mm
Of which pre-installed:
2x 120 mm (ARGB, cover) 1x 120 mm (ARGB, rear)
Radiator mountings:
Front: 1x max. 360 mm
Lid: 1x max. 280 mm
Back: 1x max. 120 mm
Drive bays:
1x 2.5 or 2x 3.5 (internal)
2x 2.5 inches (internal, mainboard tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0 type A
2x audio (1x in, 1x out)
Maximum graphics card length: 326 mm (without front fan)
Maximum CPU cooler height: 161 mm
Maximum power supply length: 166 mm (including cable)