Aerocool Genesis ARGB V2 Midi Tower - black [ACCM-PV40112.11]

- Suitable for motherboards up to ATX form factor
- Space for graphics cards up to 380 mm and CPU coolers up to 154.8 mm
- A radiator up to 240 mm in size is possible on the front
- I/O panel with two USB 3.0, two USB 2.0 ports and HD audio
- Space for up to seven fans
- LED button in the I/O panel controls ARGB

The Aerocool Genesis ARGB Midi Tower in detail
The Aerocool Genesis ARGB Midi Tower brings light to your new PC system and offers excellent air circulation. Fans can be installed not only in the front, but on each side of the case. The ARGB front panel offers the perfect basis for turning your PC into an explosion of color. With the tempered glass on the side, you won't miss the light show. You can control the ARGB lighting at the touch of a button via the I/O panel.

You can fit everything in
The interior is completely black. The case uses every opportunity to organize your hardware components as best as possible, for example the power supply cover contributes to a tidy look. Underneath is the hard drive cage, which has space for two 3.5 inch or 2.5 inch drives. Two additional 2.5 inch SSDs can be attached next to the front.

Note: If you attach a radiator to the front, there is no longer enough space for additional SSDs next to it.

Together with the power supply cover, it offers numerous openings for cable management. The standard ATX power supply is next to the hard drive cage.

Even particularly powerful graphics cards up to a length of 380 mm fit in the midi tower. CPU coolers can be a maximum of 154.8 millimeters high. Mainboards, on the other hand, can reach up to ATX format.

There are 7 expansion slots. On the I/O panel in the lid there are two USB 3.0 ports of type A, two USB 2.0 ports and 3.5 mm jack connections for audio and microphone.
Cool as much as you can

Seven 120 mm fans can be installed in the Aerorocool Genesis Midi Tower. One is included at the back with ARGB lighting. The following can also be installed optionally:
- Two in the front
- Two in the lid
- Two above the PSU shroud
Alternatively, a water cooling system with a 120/240 mm radiator can be installed in the front.

Please note: It is not compatible with a cooler with a pump on the radiator itself.

There is a mesh insert with a honeycomb pattern on the top. This prevents dust from getting into your system.

Technical details:
- Dimensions: 180 x 440 x 385 mm (W x H x D)
- Material: Steel
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- Front: 2x 120 mm
-  Cover: 2x 120 mm
- Bottom; 2x 120 mm
- Rear: 1x 120
- Of which pre-installed:
- Rear: 1x 120 mm ARGB fan
- Radiator mountings: 1x 120/ 240 mm in the front
- Filter: top (magnetic), bottom (removable)
- Drive bays:
- Hard drive cage: 2x 3.5 inch / 2.5 inch
- Front: 2x 2.5 inch
- Expansion slots: 7 (horizontal)
- I/O panel:
- 2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 2x USB 2.0 (Type A, max 480 Mbit/s)
- 2x 3.5 mm jack (4-pin, TRRS, for microphone/headphones)
- 1x Power button
- 1x Reset button
- 1x LED switch
- Maximum graphics card length: 380 mm (without front fans installed)
- Maximum CPU cooler height: 154.8 mm
- Power supply: max. 178 mm length
- Scope of delivery:
- 1x Aerocool Genesis
- 1x 120 mm ARGB fan
- 1x power cable