Aerocool Gate Pro-G-BK-v1 RGB Big Tower - Black Window [ACCF-PB11043.11]

The housing offers numerous options for installing a water cooling system with powerful components and is equipped with a preinstalled RGB LED controller and three digitally addressable RGB LED fans in 14-centimeter format.

The features of the Aerocool Tor Pro at a glance:
 Stylish big tower for motherboards up to E-ATX
- -Separate bay for the power supply
- Side door and tempered glass front
- 4x 140mm fan with digitally addressable RGB LED lighting preinstalled
- A total of 8x 140 or 11x 120 fans possible
- Space for max. 3 radiators (1x 480 mm & 2x 280 mm)
- Graphics cards up to 383 mm, CPU cooler up to 189 mm
- 2x 3.5-, 2.5- and 2x 2.5-inch slots (internal)
- I / O panel with 2x USB 3.0 Type A and 2x USB 2.0 Type-A
- The Gate Pro by Aerocool: Simple shapes, elaborate lighting

First of all, the exterior of the Aerocool Tor Pro catches your eye: the black steel case offers a smooth, clear design language. Its front and left-hand side panels are flat, made of toughened glass, and provide glimpses of the equally black interior of the Big Tower, which offers enough space for E-ATX motherboards and up to 383-millimeter-long graphics cards. The front cover offers air inlets on the sides and sufficient clearance for the fans installed there.

Cooling with air and water
A total of eleven 120 millimeters or eight 140-millimeter fans can be accommodated in the Gate Pro: A whopping four 120, three 140 or two 200-fan can be installed in the front of the tower. There are three 120- or two 140-millimeter fans in the base and power-supply cage, and there is room for two 120- or 140-millimeter fans in the back panel, although the top can not be used if fans or radiators are installed on the power-supply cage , Four digitally addressable RGB LED fans with square dispersion frames are pre-installed at the factory - three in the front and one in the back. Processor coolers may be up to 189 millimeters high.

The Big-Tower also offers a number of options for the installation of water cooling systems: an enormously large 480 heat exchanger can be accommodated in the front. The rear panel, power supply cage and bottom of the Tor Pro offer the option to install a 280 or 240 mm radiator. Rear wall and power supply cage compete here around the room inside, so are optional to use. In the floor, radiator and fan must not exceed a total height of 52 millimeters.

Drives and I / O panel
A total of four data drives can be installed in the Aerocool Tor Pro: Two mounts for 3.5 "and 2.5" drives and two mounts for 2.5 "drives can be mounted on the back of the motherboard tray. The ATX power supply unit is housed in a separate cage in the upper part of the housing and transfers its waste heat into the interior of the Tor Pro, where a fan mounted in the rear side conveys it to the outside. Whole nine PCI slot bezels allow the installation of various expansion cards and multi-GPU setups.

A special feature of the Tor Pro is the built-in RGB LED controller, which allows the control of the lighting effects of up to ten compatible RGB LED fans or -strips and controlled by ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome and MSI Mystic Light can. In addition to the compulsory power and reset buttons, the I / O panel has two USB 2.0 ports and two USB 3.0 ports and a dedicated button for controlling the RGB LED controller. The scope of delivery of the housing also includes a remote control for controlling the RGB LED lighting.

Technical details:
- Dimensions: 249.5 x 566 x 473 mm (W x H x D)
- Weight: about 11 kg
- Material: Steel, Plastic, Tempered Glass (Front / Side)
- Color: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 4x 120 / 3x 140 / 2x 200 mm (front)
- 3x 120 / 2x 140 mm (to power supply bay)
- 3x 120 / 2x 140 mm (bottom)
- 2x 140 / 2x 120 mm (back)
- Preinstalled:
- 3x 140 mm (front side)
- 1x 140 mm (back)
- Radiator mountings (partial waiver of fan slots):
- 1x max. 480/360 mm (front side)
- 1x max. 280/240 mm (to power supply bay)
- 1x max. 280/240 mm (back side)
- 1x max. 280/240 mm (floor)
- Filter: none
Drive Bays:
- 4x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 9
I / O panel:
- 2x USB 3.0
- 2x USB 2.0
- 1x Audio In / Out
- Maximum graphics card length: 383
- Maximum CPU cooler height: 189 mm
- -Maximum depth of floor radiator + fan: 52 mm
Delivery:
- 4x 140mm fan (pre-installed)
- 1x RGB LED controller (pre-installed, 10x 6-pin)
- 1x remote control
- 1x user manual
- mounting screws