ATX Pin Remover Tool - ModMyMachine Edition [G171]

For this purpose, the tip is pressed into the connections and compressed with the cable on the back side out. Depending on the connection can vary the force required for this purpose. Helpful in some cases is a short reverse pressure by the cable from the remote end can be pushed toward terminal.

After disconnecting the cable is brought to the desired length, provided with new sheathing or soldered and connected again to the port. Done! Similarly, the procedure is the sleeving. This version is suitable for a variety of connectors: ATX Motherboard Connector, 12V and EPS extension connectors, PCIe, SATA (power), 3-pin.

Please observe the safety regulations in dealing with current on the hardware.Modifications can lead to serious problems in this area, failures and accidents, so all conversions done at your own risk.

Technical details:
Material: spring steel
Suitable for removal of cables from the following lines (examples):
20/24-pin ATX mainboard connector
4-pin ATX12V / EPS Zusatzstecker
6-/8-Pin PCIe
4-pin SATA (current)
3-pin fan