XSPC Raystorm water cooling kit D5 RX480 V3 [5060175585264]

The manufacturer XSPC after, the cooler contained in the kit can boast with an incredible, even the best performance of all time. Add to that an absolutely unique look! Designed for multi-core CPUs, combined from Plexi and Acetal, this cooler is a feast for the eyes. Wonderful, simple design with excellent workmanship. With the included 3 mm wide, blue double LEDs (up to four total possible) can be put in the system with great light effects in this scene cooler.

Characteristic is the very fine cooling structure, which allows a large area with tight-fitting fins to transfer the heat from the radiator to the water. In contrast, the channels are very large in size and are centrally flows. For a low water resistance and high flow rates are achieved at the same time.

The cooler is made ​​of extremely pure electrolytic copper to allow optimal heat transfer is guaranteed. The mount is solid and built in star shape. The modular structure with different backplates switching to another socket is always possible and accomplished with a few simple steps.

The supplied XSPC Dual Bay Reservoirs is a particularly interesting solution reservoir for water cooling systems, since it allows different application scenarios. Basically, made ​​of solid nylon watercooling component is housed in two free 5.25-inch slots of the housing.

A small window on the front of transparent acrylic allows the view of the cooling liquid or her level, if needed, just in time to be refilled. This is done via a filler at the top, including the Dual-Bay-Conditions must be pulled out easily.

By filling both chambers with cooling liquid are provided. This leads to a second purpose, the XSPC dual bay Terms practically identical with true: It takes a Laing D5 pump at the back on.

The D5 XSPC Dual Bay Reservoir is therefore a real all-rounder, thanks to an LED-bore can also provide a visual enhancement of the charged refrigerant.

The D5 Vario is the ultimate pump for PC water cooling systems. It has exceptional performance and unsurpassed reliability. Thanks Vario knob you can adjust the speed of the pump your own system. Given the Tacho output can be used to monitor the pump speed exactly.

The only moving part in a spherical motor pump is a spherical rotor / impeller unit, which sits on an ultra-hard, wear-resistant ceramic ball. A conventional shaft with bearings and shaft seals is not available. The spherical bearing of the rotor / impeller unit on the ceramics bearing ball provides a lot of advantages: The development of bearing play - and thus a noise increase - is not possible on principle. The pump is silent over the entire term.

The bearing is self-adjusting. It is lubricated directly by the delivery medium (wet-running pump). No need for maintenance. Since the rotor is always held magnetically in the intended position, smaller particles pose no problem. Blocking of the pump is not possible under normal circumstances. Even after lengthy downtimes a safe approach is given.

The ball motor principle enables an economical enterprise with comparatively high performance. By voltage variation, the D5 DC pump can easily be adjusted over a wide power range. All wetted parts are corrosion resistant.

The radiator in this water cooling kit is the familiar XSPC RX480 radiator in the third version. The RX Series is part of the top performers and that the market has to offer. The high performance radiators are incredibly edgy, made ​​large and massive. An improved soldering and precise welds XSPC has made ​​a lace-radiator which is optimized due to its low flow resistance for the fan at low speed.

The V3 series of RX radiators was therefore optimized in size and weight on absolute maximum. The standard width of all new versions is 130 mm, therefore, must be measured precisely how the radiators are to install, especially in small, cramped enclosures. It can be mounted on both sides of four 120-mm fan with UNC 6-32 thread.

The intelligent arrangement of the slats allows optimal cooling. Between its parallel channels slats are installed, the larger spacings than most other radiators. Due to its height, it offers course in spite of the coarse density a large surface area for heat dissipation. Distributed at the level he has two water channels in 21 x 2 mm size.

The processing and very special in the matt black finish of radiators is still top notch. UNC 6-32 thread and the G 1/4 thread of connection holes ensure easy installation and maximum compatibility.

The matching fan are also included in the kit. Three 120 mm fans are in the package and must be mounted on the radiator itself. Each of the three fan reaches a rotational speed of 1,650 rev / min.

Are also supplied with a 2 meter long 7/16 inch tube (16/11 mm OD / ID) and two fan grills for the supplied fan, G1 / 4-inch to 7/16-inch adapter, thermal grease, brackets for Intel and AMD CPUs, as well as a mounting kit for socket AM2 (+), AM3 (+) and FM1 / 2 (+).

Note: This watercooling kit must be assembled and filled themselves.

Technical details (Raystorm CPU Water Block):

     Dimensions: 56 x 3 x 56 mm
     Material: electrolytic copper, acetal
     Weight: about 130 g
     Pressure (tested): 5 bar
     Thread: 2x 1/4 inch
     compatibility:
     Intel LGA 1150, 1155, 1156, 1366, 2011
     AMD Socket AM2, AM2 +, AM3, AM3 +, FM1, FM2, FM2 +


Technical details (D5 Dual Bay Reservoir / pump combination):

     Material: Nylon (main body), acrylic (front), aluminum (panel)
     Dimensions: 149 x 85.5 x 105 mm (W x H x D)
     Compatibility: 2x 5.25-inch slot
     Filling volume: 300 ml
     Thread: 4x G1 / 4 inch
     Lighting: 1x 5mm LED hole
     Motor design: Electronically commutated spherical motor
     Operating voltage: 8-24 volts
     Power consumption: max. 37 W
     Head at 12V: 3.7 m
     Max. Capacity: 1,200 L / h
     . Maximum system temperature: 50 ° C
     connections:
     1x 4-pin Molex
     1x 3-pin tacho


Technical details (RX480 Quad-Radiator):

     Material: copper, brass
     Dimensions: 130 x 56 x 518.5 mm (W x H x D)
     Weight (empty / without connections): ca. 2052 g
     Matte Black
     Connection: 2x G 1/4
     Fan mounting with UNC 6-32 thread (on both sides) for four 120-mm fan


Scope of delivery:

     black faceplate
     4x 120 mm fans (1,650 U / min.)
     4x 120mm Fan Grills
     1x 5mm LED (blue)
     1x 3-mm double-LED (blue)
     AM2 and AM3 mounting kit
     Intel and AMD Raystorm Brackets
     Socket 1366 and 1150/1155/1156 Backplates
     6x G1 / 4 inch to 7/16 inch Compression Fittings (Black Chrome)
     80 to 120 mm radiator brackets
     2-m-7/16-tube (16/11 mm OD / ID)
     24 Pin ATX-bridging plug
     K2 Thermal Conductivity Paste