The MO-RA3 is the uncompromising successor of the successful MO-RA series second The cooling performance was improved even further over the already potent successor. The numbers speak for themselves, over 28m of copper tube and 2.5 square meters of fins are used to make a MO-RA3. The coolant flows parallelly four times through 72 channels. The fins of the MO-RA3 were specially optimized for use of slow-spinning fans. The gigantic surface area of the radiator and efficient geometry guarantee extreme cooling performance.
The design of the quadruple parallel channels Ensures a very low flow resistance Despite the huge cooling surface. Additional versatility is thus provided by the now flow-optimized connection block with three G1 / 4 "threads.
The integrated M3 threads allow mounting of up to 9x120mm fans directly on the MO-RA3. Additionally further threads are integrated for mounting of optional accessories.

The MO-RA3 is shipped with all components needed for operation. Included are for example the screw plugs for sealing unused connection of the thread, the fan screws and spacers for mounting on a case are also included.
With the flexible modular system the MO-RA3 can be adjusted to personal demand. Available optional accessories are e.g. different fan grills, fan controllers, as well as external mounts feet.

The production of the MO-RA3 is done only in Europe. Development and assemply are done in Germany, a large percentage of the components is therefore made in Germany.

Technical specifications:
Internal material: Copper tubes, aluminum fins
Casing Material: Coated steel sheet material, brushed stainless steel
Outer dimensions (LxWxH): 415 x 383 x 65mm
Weight: approx. 6000g
Pressure tested: 5 bar
Surface: Black powder coating
Connection threads: 6 x 1 / 4 "

Extent of delivery:
1x MO RA3 9x120 LT
4x Screw plug G 1 / 4 inch
Spacer 4x M4x20mm
1x kit fan screws (36 pcs)
1x Mounting manual

This product has been reviewed for you:
Efficiency gurus