 |
SKU: 14393 Warranty: 12 months |
Overview
The NSB HEATKILLER ® 3.0 Series combines performance and maximum compatibility. The Mainboardkühler are designed so that the compatibility is guaranteed at very many motherboards. By twisting and turning of the bracket, this can be mounted in any desired position.
The scope of supply includes two brackets, so the cooler can be mounted on all motherboards with a diagonal hole spacing from 43.0 to 79.2 mm. The location of the holes is not important, because the cooler can still be aligned parallel to the board.
The base plate is made of high-purity electrolytic copper and has a very efficient cooling structure, the flow resistance of the cooler is extremely low. Despite its small external dimensions (39x39mm) are the threaded holes (G 1 / 4 inch) 22mm wide apart.
The upper part is made of high POM, the support and applications of polished stainless steel.
The HEATKILLER ® SB 3.0 LT is designed primarily for mounting on the South Bridge. By the unilateral flattening the cooler can be mounted or even if a PCIe slot on the same level of South Bridge is.
Details:
Material: Electrolytic copper, POM, stainless steel
Dimensions (Block) (LxWxH) 39 x 39 x 18mm
Weight: about 50g
Pressure tested: 5 bar
Seal: EPDM 75 (max. 150 ° C)
Connection: G ¼ (DIN ISO 228-1)
Thread distance: 22.0 mm
Included:
1x HEATKILLER ® SB LT Rev3.0
1x bracket (43.0 to 59.0 mm)
1x bracket (59.5 to 79.2 mm)
1x mounting hardware / instructions
