Thermaltake Madrid 80 Plus Gold Power supply, modular - 850 Watt [W0495RE]

 But also the power supply division was able to collect points again and again by very good performance and a comparatively favorable price points. The same applies to the 850 Watt "Madrid" with very good efficiency, 140 mm fan and very quiet operation.

The power supply has a high efficiency of over 87 percent (maximum 92%) and has therefore been awarded the 80 Plus Gold certificate. This saves a lot of money in the long term compared to power supplies with lower efficiency. Finally, more efficient power supplies reduce the current consumption with less loss. Since the general energy costs will hardly drop, so there are good arguments for the purchase of such an efficient power supply.

The black look of the "Madrid" looks against the standard in this price class very noble and high-quality. It enriches almost every tower with cool style. The fan grille is also black, which makes the power supply very uniform. Under the grille, a 140 mm fan is installed, which operates at a maximum of 1,500 revolutions per minute and keeps the power supply cool. Depending on the type of housing, the surrounding components also benefit from the airflow. Thanks to high efficiency and low volume, a "Madrid" is also recommended as a replacement for older, noisy and / or poorer power supplies.

The 850-watt model has a strong 12-volt line, which leaves room for the selection of supported hardware. The current on the single rail is thermaltake with 840 watts. This makes it possible to realize a somewhat stronger system, which also has air upwards. Six modular 6 + 2-pin connectors are available for graphics cards. Multi-GPU systems do not have to be dispensed with.

The other connections are absolutely appropriate and adapted to the performance class. A fixed mainboard connector with 20 + 4 pin design and an ATX 12V 4 + 4-pin connector offer free choice between current and older hardware. In addition to eight Molex connectors, 1x FDD for older drives and fans, a total of twelve SATA drives can be powered. The connection cables are partly modular, partly solidly connected to the power supply.

Technical details:
Intel ATX 12V 2.3
Active PFC
Dimensions: 150 x 86 x 160 mm (W x H x D)
Color: Black
Fan: 140 mm (1,500 rpm)
Efficiency: max. 92% (including 80Plus Gold Certificate)
Power: 850 watts
+ 3.3V: 25A
+ 5V: 25A
3.3V + 5V: 130W
+ 12V: 70A / 840W
-12V: 0.8 A / 9.6 W
+ 5VSB: 3.0A / 15W
Connections:
1x 20 + 4-pin motherboard
1x 4 + 4-pin ATX12V
8x 4-pin Molex
6x 6 + 2 pin PCIe
12x SATA
1x Floppy
Power Good Signal: 100 - 500 ms
Delay time: 12 ms (min.) At full load
Input voltage: 100 V - 240 V
Input frequency: 47 - 63 Hz
Input current: 10 A / 5 A
Lifetime: min. 100,000 h