Thermaltake Cologne 80 Plus Bronze Power Supply - 730 Watt [W0394RE]

But also the power supply division was able to collect points again and again by very good performance and a comparatively favorable price points. The same applies to the 80-plus-bronze re-edition of the 730 Watt "Cologne" with very good efficiency, quiet operation and a generous manufacturing guarantee.

The power supply has a high efficiency of at least 82 to 88 percent and has therefore been awarded the 80 Plus Bronze Certificate. This saves a lot of money in the long term compared to power supplies with lower efficiency. After all, more efficient power supplies reduce the current consumption with less loss. Since the general energy costs will hardly drop, so there are good arguments for the purchase of such an efficient power supply.

The black look of the "Cologne" looks against the standard in this price class very noble and high quality. It enriches almost every tower with cool style. The fan grille is also black, so the power supply is very uniform. Beneath the grille, a 140 mm fan is installed, which performs silently at a maximum of 2,300 revolutions per minute and keeps the power supply cool. Depending on the type of housing, the surrounding components also benefit from the airflow. Thanks to its high efficiency and low volume, a "Cologne" is also a good alternative to older, noisy and / or power supplies with lower efficiency.

The 730-Watt model has a potent 12-volt line, which leaves room for the selection of supported hardware. The permissible load on the single rail is 62 A thermaltake. This is definitely a pretty potent system, which also has good air upwards. Four 6 + 2-pin connectors are available for graphics cards. On multi-GPU systems must not be dispensed with thanks to the good performance.

The other connections are absolutely appropriate and adapted to the performance class. A mainboard connector with 20 + 4-pin design and an ATX 12V-4 + 4-pin connector offer free choice between current and older hardware. In addition to six Molex connectors, 1x FDD for older drives and fans, a total of eight SATA drives can be supplied with power. The connection cables are firmly connected to the power supply.

Technical details:
Intel ATX 12V 2.3
Active PFC
Dimensions: 150 x 86 x 160 mm (W x H x D)
Color: Black
Fan: 140 mm
Fan speed: max. 2,300 rpm
Efficiency: 82-88% efficiency @ 20-100% load (including 80 plus bronze certificate)
Total power: 730 W
+ 3.3V: 22A
+ 5V: 22A
3.3V + 5V: 120W
+ 12V: 62A / 744W
-12V: 0.3 A / 3.6 W
+ 5VSB: 2.5 A / 12.5 W
Connections:
1x 20 + 4-pin motherboard
1x 4 + 4-pin ATX12V
4x 6 + 2-pin PCIe
8x SATA
6x 4-pin Molex
1x 4-pin floppy
Power Good Signal: 100 - 500 ms
Delay time: 16 ms (min.) At 80% load
Input voltage: 110 V - 240 V
Input frequency: 47 - 63 Hz
Input current: 10A