Specially developed for fast and accurate measurements with Dispay temperature sensor for connection to a water cooling. The sensor can be integrated at any point in the cooling circuit, as can be connected on both sides of the tube. The sensor can be screwed in by hand or with a spanner. In the area of ​​the sensor, the remaining wall thickness is reduced to <1mm and isolates the sensor from the outside, allowing quick and accurate measurements in close proximity to water. The Magicool sensor has some advantages over conventional in-line measuring devices: Instead of continuing to measure a sensor away from the water, a mixing temperature of air and water:
... is the sensor for room temperature through an excellent insulator.
... the measurement is almost on the water.
... almost no delay results in more changes in temperature.

Technical data:
Material: Nickel plated brass
Accuracy: 0.3 C (precision measurement possible)
Cable: 2-pin connector with 50cm cable
Resistance 10KOhm
Pre-mounted display with blue backlight
Power supply via 4-pin Molex connector
Measuring range: 0 to 90 ° C
Power supply: 5V power supply over-voltage

Delivery:
Thermo sensor In-Line 10/8mm including 2x nut for 10/8mm hose and the device and a display with 4-pin connector

Note:
L ° C means no connection (= check the sensor cable from the display!)
H ° C is: wrong polarity / short circuit (= connection of cable on the sensor display falschrum / poland at both!)
-Xx ° C is, well wrong polarity (= cable from the display attached to sensor the other way around!)