SPECIAL OFFER Temperature Sensor G1/4 With Display (Red) []

High-precision thermal sensor for 1 / 4 inch thread. Can directly into a thread of a reservoir such as Coolplex, Aluminum tube or Bullseye are screwed and seal of a durable O-ring. The shaft is knurled, which facilitates the insertion by hand, in the range of the sensor head, the remaining wall thickness is reduced to
The blue illuminated thermometer the temperature measurement enables anywhere inside or outside of the PC. With this thermometer, they have the temperature closely, as graphics card, power supply, CPU, hard disk or just the enclosure.

Technical data:
Thermo Sensor:
Material: Nickel plated brass
Accuracy: 0.3 C (precision measurement possible)
Cable: 2-pin connector with 50cm cable
Resistance 10KOhm
Measuring range: 0 to 70 ° C
Power supply: 5V power supply over-voltage

Display:
Connection: By Ground 4pin Molex connector
Dimensions: 4.8 x 2.8 x 1.9 cm

Note:
L ° C means no connection (= check the sensor cable from the display!)
H ° C is: wrong polarity / short circuit (= connection of cable on the sensor display falschrum / poland at both!)
-xx ° C is, well wrong polarity (= cable from the display attached to sensor the other way around!)