Silverstone SST-PS14B Midi-Tower - black [SST-PS14B]

 Both Midi-Tower, however, are kept in black and share the same clever construction inside the steel body.
The features of the Silverstone SST-PS14B Midi-Towers:

Extremely clear interior with power supply and slide-in covers
Opening the motherboard backplate behind the CPU area for quick cooling mounting
Black painted interior
Supports graphics cards up to 401mm
Plenty of room for powerful hardware

If you quickly and simply loosen the thumbscrews of the window side part, you can see behind it a lot of space for strong hardware and a clear arrangement: The power supply sits at the rear at the bottom and supplies itself with fresh air through a filtered bottom opening. In addition, the mainboard (Micro-ATX or ATX) to place, for graphics cards and Co. are seven PCI slots available. Cables can be laid properly through many small openings on the back of the tray, the largest is the replacement of a processor screwed to the backplate (maximum height: 16.5 cm).

In the rear, a large 120 mm fan is already installed, at the classic height of the optional tower cooler. If graphics cards are plugged into the upper mainboard slots, they can extend over a lush length of 40.1 cm because it does not hinder their expansion. The hard disk cage for two tool-free 3.5 "HDDs has specifically downgraded Silverstone on the Precision SST-PS14B, so that for VGAs between it and the upper 5.25 inch slot (compatible with 2x 2.5") For an ODD (also tool-free).
Cooling with fans or heat sinks

In exactly the gap for long graphics cards, two additional 140 mm fans can be installed to support the ventilation. The fans can blow cool air freely into the housing interior and suck them filtered through the side ventilation slots of the front panel. This is the PS14B made of plastic, but has the solid look of brushed aluminum. Due to the closed front surface, less noise is emitted from the housing, which also applies to the two closed side panels and the cover.

Alternatively, of course, water cooling can also be used. The Precision SST-PS14B has a wide heat sink support. Two 120 mm, one 140 mm or one 240 mm heat sink can be installed in the front part of the housing. In the rear, the 120 mm fan can also be replaced by a correspondingly large radiator.

Further features of the Precision SST-PS14B

The transmission of vibrations to the ground is counteracted by the four rubberized feet of the inside and outside black Midi-Tower. The Silverstone Precision SST-PS14B's feature list is complemented by two fast external USB 3.0 ports besides the audio jacks and the power button, as well as two recordings for 2.5-inch SSDs or notebook hard drives Also remove them, and covers the power supply and plug-in areas for separate cooling zones with unobstructed airflow.

Technical details:
Dimensions: 210 x 465 x 458.6 mm (W x H x D)
Weight: approx. 5.7 kg
Material: steel, plastic
Color: Black
Form Factor: ATX, Micro-ATX
Total fan possible:
Front: 2x 140/120 mm, 1x 80 mm
Back: 1x 120 mm
Pre-installed:
1x 120 mm (rear side)
Heat Exchanger Support:
Front: 2x 120 mm / 1x 140 mm / 1x 240 mm
Back: 1x 120 mm
Filter: front, power supply (removable)
Drive Shafts:
1x 5.25 "(external, without tools)
2x 3.5 inches (internal, no tools required)
2x 2.5 inches (internal)
Power supply: 1x standard ATX (optional, max 220 mm length)
Expansion slots: 7
I / O panel:
2x USB 3.0 (internal connection)
1x each audio in / out
Maximum net length: 220 mm
Maximum graphics card length: 401 mm (upper slots)
Maximum CPU cooler height: 165 mm