Details
The three pre-installed front fans are equipped with RGB LED fan grilles and allow configuration via the front panel or directly via the appropriate software on the mainboard. In addition to comprehensive hardware support, the white Midi-Tower can convince with a stylish design and features in the FX version a noble side window made of tinted tempered glass and an impressive unicorn graphic on the other side panel.
The features of the Silverstone SST-PM01B-RGB Primera Midi-Tower
Space for up to 41 cm long gaming graphics cards
Up to two 280/360 radiators
Three 140mm front fans with RGB LED lattice gratings
Holder for terms and conditions
Fan hub for up to 10 fans
LED Control
Up to 9 SSDs!
2x USB 3.0 and USB 2.0 each
Large window made of tinted tempered glass in the left side panel
Impressive graphics on the right side panel
SST-PM01B-RGB Primera: Midi-Tower for custom water cooling
The black-painted interior of the Midi Tower is divided into two areas by a power supply cover, so that the view through the tinted tempered glass window gives a tidy impression. The front can easily accommodate a 240 or 280 mm radiator, while installing a 360 mm radiator, the lower part of the heat exchanger projects into the area under the PSU Shroud. In this case, you may need to dispense with the three drive bays in front of the power supply.
The lid can also be installed with a 280/360 radiator, so you can store two large radiators. However, with the use of two 360mm radiators, attention must be paid to the thickness of the chosen models to avoid collision of the heat exchangers in the upper front of the tower.
Expansion tanks (AGBs) can be mounted directly on the motherboard tray and pumps can be placed in front of the power supply or instead of the drive bays at the bottom of the tower. Also, a mounting on the motherboard tray is possible, but this would mean that in the front no radiator can be mounted.
Design Case for Overclocker & Gamer
The SST-PM01B-RGB Primera Midi-Tower accommodates up to 41-cm graphics cards in multi-GPU setup, rewarding the use of custom water cooling. If no custom water cooling is used, the high-end CPU can be tethered to the ATX motherboard via an AiO solution or up to 18 cm high CPU cooler.
There are five dedicated 2.5-inch bays available for data storage, and the drive cage on the bottom can hold three 2.5-inch or 3.5-inch SSDs / HDDs each. In front of the power supply, which may be up to 24 cm long, another HDD or SSD can be mounted directly on the ground.
Three 140mm fans with RGB LED fan grilles and another 120 fan in the back ensure a very good airflow in the midi tower. Thanks to the illuminated fan grille and the existing LED strips, the lighting of the entire housing can be configured in terms of color and effect via the control in the front panel or via suitable mainboard software. (Asus Aura Sync, ASRock Aura RGB LED, MSI Mystic Light Sync) Three additional 120mm or two 140mm fans can be installed in the lid. The pre-installed 120er fan in the back can be replaced by a 140er fan or a radiator if necessary.
Very good midi tower with many features: the SST-PM01B-RGB Primera
Primera (Spanish for "first class") lives up to its name, because the Midi-Tower knows how to convince with first-class support for water cooling and hardware. The large hard glass window provides a view of the hardware illuminated by RGB LEDs. The lighting can be set according to the wishes of the user via an LED control or via mainboard software. For comprehensive fan control, the case also has a convenient fan hub.
Visually, the tower knows how to please through the large, meshed mesh panel in the front, while the top cover looks like a spoiler. Around the window and in small inlets on the lid, the case has another RGB LEDs that give the Primera a touch of extravagance.
The I / O panel with LED control, two audio ports and four USB ports is located on the right side of the lid, while the power button on the front is on the left side of the lid. Removable dust filters are located in front of the front fans and under the power supply.
Technical details:
Dimensions: 220 x 571 x 560 mm (W x H x D)
Weight: about 10.1 kg
Material: steel / plastic / tempered glass
Color: White (outer shell), Black (interior)
Form factor: ATX, Micro-ATX,
Total fan possible:
3x 140/120 mm (front)
2x 140 / 3x 120 mm (cover)
1x 140/120 mm (back)
Preinstalled:
3x 140 mm (front, with RGB LED fan guards)
1x 140 mm (back)
Radiator mountings (partial waiver of HDD and / or fan slots):
1x max. 240/280/360 mm (front side)
1x max. 240/280/360 mm (cover)
1x max. 120/140 mm (back)
Filter: power supply (removable)
Drive Bays:
5x 2.5 inches (internal)
4x 2.5 / 3.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion Slots: 7
I / O panel:
1x LED controller
2x USB 3.0
2x USB 2.0
2x audio (in / out)
Maximum graphics card length: 419 mm
Maximum CPU cooler height: 180 mm
Maximum power supply length: 240 mm