Quick Release Connector G1/4 Outer Thread to socket - Black Matt [0]

The "Mama piece" of high-end quick!

 

The new generation has been specifically designed for high-flow systems. These couplings have Outstanding good quality and practicality, as one would expect from Aquatuning. The "daddy" and "mommy track" are each provided with a Senkstift, but they are created in such a way that is not possible disconnect tilt and thus seals the system 100% tig. When connecting a Silkondichtring hugs the inner wall of the "Mama piece" which provides for additional leaks. It does not change during the operation, the compound dissolves by means of a rotational movement, the two pieces are joined together, which are also no longer be separated with extreme force.

 

The opposite side is provided with a 1/4inch thread, which increases the range even further!

  Material: brass (matte black)

  Dimensions: 42,6 x20, 5mm

  Thread: 1/4 "male thread

  Port internal diameter: 9mm

  1x quick-G1 / 4 "male to clutch - black matt

 

  To plug in and clutch guarantee watertightness, this connection must be designed very carefully and tightly. This can lead to the fact that roughening with frequent plugging the sealing O-ring through to tearing. Therefore, when assembling and opening the connection is always the seal to be kept wet!

  If the seal but tear, so this is not covered under warranty, but due to improper use. Replacement o-rings, they may find the item number 95002nd

 

Note: For the operation of the clutch, the counterpart is needed. - These couplings are also compatible with the version Koolance VL3.

Info: Non-leak (ie after separation 1-2 drops out).