PrimoChill ICE Non-Conductive Coolant (32 oz.) - Clear [PCICE-CLEAR]

Features:
• Specially formulated with excellent lubrication properties to increase pump life.
• Special corrosive inhibiting ingredients to prevent sludge build up and galvanic corrosion.
• Safe on all plastics, rubbers, and miscellaneous gasket materials.
• Environmentally responsible food safe non toxic biodegradable product—good for you, good for your PC, and good for the planet.
• Formulated for high flow pumps and is not prone to mechanical sheering.
• Ships with the dye separate so customers can get the exact tint they want.
• 3 year shelf life.
• *Non-Conductive.
• Freeze point below -60F.

USAGE NOTES:

*Non-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia.  Adding additional agents will cause a  chemical reaction with the agent currently in the fluid.  It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up.

Mixing Instructions:
1. Remove Cap from PC Ice bottle and Dye Bomb.
2. Place dye bomb syringe into the top PC Ice bottle.
3. Draw PC Ice fluid up into the syringe until full.
4. Press plunger all the way down, releasing all fluid into the PC Ice bottle.
5. Repeat steps 3 and 4 until the desired tint is achieved.