Phobya Xtreme SUPERNOVA 1260 Radiator []

Independent tests show, the bigger the fan the more cooling power can be expected. Especially in the low speed range, the volume and makes the performance very noticeable!

This radiator can be operated passively, the performance is more than adequate for larger systems. This is the panel to which the fans are screwed removable so that the full surface comes into contact with the surrounding air, thus providing even better passive cooling performance!

Six ports allow a variety of mounting options. 1 pair of connectors are located on the front sides of the radiator, a second pair of angled forward. It also allows easier bleeding!

Technical data:
Material: Copper, brass chambers
Dimensions: (L x W x H): 460x420x46mm
Ports: 6x G1 / 4 "
Weight: about 5000g
Fan Thread Size: M3
Tested pressure: 2 bar

Delivery:
1x Radiator
4 x M3 x 8mm silver Phillips screws
32x M3 x 30mm silver Phillips screws

Note:
The screws supplied are designed for fans with a thickness of 25mm. If you use 200 or 220 fans, which typically have a thickness of 32mm, we recommend you have an extra 40mm long screws.

Before and during installation:
Radiator flush before use
-The fan screen is attached only space accounting purposes only and is seated properly established by the fan assembly.
-Excessive tightening of the screws can damage the radiator. Make sure that the screws do not damage the fins of the radiator. Damage due to improper use are not covered under warranty.
-Others may be available M3 screws too long depending on the application, just screw it so much that is damaging the radiator.