 |
SKU: 35311 Warranty: 12 months |
Overview
An absolute highend radiator is characterized by a sharp price / performance ratio of these new Phobya radiator. The new Phobya only offer excellent optics and high quality workmanship and absolute top-cooling performance. The Phobya radiators of the new Xtreme series are amongst the absolute high-end heat exchangers. The copper fins are specially designed super silent fan (low capacity). For a very low flow resistance of the parallel channels. Perfect for the slowly rotating huge fan of 180mm and 200mm.
The highlight of this radiator are a removable fan cover. On this panel are several fan M3 threaded holes around the compatibility of various fans and accordingly to allow for housing. Another idea would be to appoint an additional panel and mount them on both sides. Could with less speed and the resulting lower noise, the same cooling performance can be achieved. Conversely, of course, would be out of there at full power even more cooling power!
The Phobya Xtreme 400 radiator can also be operated passively, the performance for medium to large systems is more than sufficient. For this may be the panel to which the fan is screwed, simply omitted, so that the full surface comes into contact with the surrounding air, thus providing even better passive cooling performance!
In the radiator already 4x 1 / 4 inch thread are integrated, allowing the removal of all standard taps. Through the included black nickel-plated plugs, the two unused ports are closed.
Fan Compatibility:
Fan type: Silverstone (SKU: 79041-79043), Phobya G-18 Silent 700rpm Red LED (SKU: 79 080) & Coolermaster MegaFlow 200 Blue LED Silent Fan (Item No.: 79 035 + 79036)
Technical data:
Material: Copper, brass chambers
Colour: Matt Black completely
Dimensions: (L x W x H): 448x200x36mm
Ports: 4 x G1 / 4 "
Weight: about 1700g
Assembly: on both sides for ventilation or as a holder
Thread size screws: M3
Fan Size: 2x 180-200mm
Tested pressure: 2 bar
Other: bleed screw
Delivery:
1x Radiator
8x M3x35mm screws
8x screws M3x5mm
1x fan screen
2x black lock screws
Note: Please note that at the height of the fan assembly. Depending on the dimensions and mounting screws should be ordered alternative.
Caution: Too wide tightening the screws can damage the radiator! Please note the correct length. Not in every case, the screws are supplied as appropriate.
Please note: Please rinse before mounting the radiator once complete, lest Fertigunungs and storage-related residues got into their circulation.
