Phobya CPU Cooler UC-2 Intel 775,1155,1156,1366,2011 LT - Plexi Edition [n/a]

 

A protective foil protects the polished underside of the waterblock. Please remove this foil before installation! 56x56mm in site, the cooling plate features of extremely fine structure slot Which is one of the most advanced on the market. 68 cooling channels fill a surface area of ​​35 x 31.3mm, each only 0.2mm wide. The fins in between the slots so have a thickness of only approx. 0.2mm. Above the slot structure, at approx. 1mm thick middle plate is inserted. It serves two purposes:
 

1: In the middle of injection slot is Placed, perpendicularly directing the coolant collected from the inlet chamber into the cooling channels

2: At the bottom of the middle plate coolant recirculation channels are Implemented. These channels increase enlarge flow rates and create mico-turbulence Caused by cross-flow, Further Increasing cooling performance
 

A wide array of tests which Conducted deterministic mine to the one designswhich lead to the ideal result. Width, length and number of injection until the slots were variied what Achieved Desired result. An innovative coolant drain system rounds off the design of the water block, featuring two recirculation outlet channels from the collection chamber to the outlet.
 

For maximum fitting compatibility, the connection threads are spaced 23mm apart (center to center), even Allowing the use of tubing with outer diameter of 16mm to! As a result of this well-rounded and innovative design, the Phobya UC-2 Achieves sensational cooling performance on single-, dual-, quad-and even hexa-core CPUs!

Optical aspects:
 

As the name suggests, here is the cover of very high quality and stabielem plexiglass. In addition to the transparent cover and the holder and the bolts are held in completely black. The surface is polished and ausgefräßten Described with letters, so did the inlet and outlet are marked with arrows. The cooler is available in 2 versions, one for AMD and one for Intel motherboards.
 

In the "Extreme" (Art. 10422) version, this waterblock unleashed the full potential of the channel ciro recirculation technology. A full metal top Improves both haptic quality and makes Additionally Increased performance possibleness. The UC-2 Extreme version gives a maximum of performance and is perfect for extreme overclocking. If you are looking for the most from your system, this water block is ideal for you. The "LT" versions (Art. 10401) Allows affordable entrance into the high-performance sector, with a performance only 2-3K below the "Extreme" version (tested on a Core i2970K quad core CPU). Top performance with affordable pricetag on - that is the LT version!
 

Water block material: Copper, plastic

Mounting plate Material: Aluminum

Dimensions Intel version: 94 x 94 x 15mm

Weightt: 215g

Connection thread size: G1 / 4 "

Mounting screw size: M4

Compatibility: Intel: 775, 1366, 1156, 1155, 2011, Xeon

1x Phobya CPU Cooler UC-2 Intel 775,1155,1156,1366,2011 LT - Plexi Edition

1x Phobya HeGrease Extreme thermal compound

1x Mounting material
 

The water block is shipped assembled and pressure-tested. In case of disassembly of the water block on the warranty seal thightness is void.
 

IMPORTANT: HAND-TIGHTEN FITTINGS ONLY! Only compatible with fittings with a thread length of 5 mm or shorter. Damages to the top plate Caused by improper use are not covered by the warranty!